Type: | EP150 |
---|---|
Material: | Rubber |
Inside Material: | Fabric |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
HEAT RESISTANT CONVEYOR BELT | ||||
Of all the demands placed on conveyor belts, heat is usually the most unforgiving and damaging. High-temperature environments accelerate the aging process, which causes the rubber to harden and crack.
Our heat resistant cover compounds are superb for prolonged exposure to hot payloads and abrasives. While others note their maximum heat that is only supported for a short term load (around a minute or two), we are proud to report our prolonged heat threshold, since that is what really matters for your operation: not a minute of heat resistance, but for the entire operational period. Please note that our heat resistant cover compounds below also reach as high as 750 degrees as others report for short term loads.
ZHENXING heat cover compound retains its heat resistance after continuous operation up to 400 degrees F, with minimal abrasion degradation. This new proprietary cover resists hardening and cracking while retaining its flexibility when running under extreme and high heat conditions
Cover characteristic | Variation for belt class | ||||
T1 | T2 | T3 | T4 | ||
Hardness (IRHD) | - variation of initial value | +20 | +20 | +20 | +20 |
- maximum value | 85 | ||||
Tensile strength (N/mm2) | - variation in percentage of initial value | -25 | -30 | -40 | -40 |
- minimum value | 12 | 10 | 5 | 5 | |
Elongation at break (%) | - variation in percentage of initial value | -50 | -50 | -55 | -55 |
- minimum value | 200 | 200 | 180 | 180 | |
- Class T1: resistant to test temperatures of up to 100 °C. | |||||
- Class T2: resistant to test temperatures of up to 125 °C. | |||||
- Class T3: resistant to test temperatures of up to 150 °C. | |||||
- Class T4: resistant to test temperatures of up to 175 °C. |
Q1: What types of Conveyor Belt you can Produce?
A: Hello,Dear We can produce Sidewall,Flat,Chevron,Steel Cord Conveyor Belt,Heat Resistant,
Oil Resistant,Acid-Alkali Resistant Cold Resistant and PIPE Conveyor Belt etc.
Q2:Does your Company have ISO Certificate?
A: Yes of course we have ISO9001:2008 Certificate.
Q3:Can you Provide FORM E Certificate of Origin for us?
A: Yes we can do Normal CO,FROM E,FROM F,FORM A etc.
Q4:What is your Delivery Time?
A:Normally Within 10-20days after getting your Prepayment or L/C.
Q5:Can you give Guarantee if I buy your belt?
A:Of course,we must give Guarantee for all of our Products,Please tell me your Details of Requirement.
Q6:What is your factory's main belt?
A:Sidewall Conveyor Belt Product List for reference.
https://sidwallconveyorbelt.en.made-in-china.com/product-list-1.html.
We will be appreciated if you can provide the following specification:
1. Conveyor belt type
2. Top cover thickness
3. Bottom cover thickness
4. No.of plies
5. Width of the conveyor belt
6. Grade:
If you are not sure for any of above,we can recommend for you.
Once we get above information we will quote exact price at soonest time.
Suppliers with verified business licenses