| Type: | Steel Cord Conveyor Belt |
|---|---|
| Material: | Steel |
| Inside Material: | Polyester |
| Samples: |
Customized
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
|
1. STEEL CORD CONVEYOR BELT
|
Steel cord conveyor belts are suitable for high strength, long distance, and heavy load transportation of materials, which are widely used in coalmines, mines, ports, metallurgy, electricity, chemical industries, etc.
1. High tensile strength: The belts are suitable for large span, long distance transportation of materials.
2. Small elongation in use: The belts need only a very short take-up stroke distance.
3. Small diameter of drive pulley: The carcass has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.
4. High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in service life.
5. Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run deviation.
6. Good troughability: As the carcass has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.
7. Good troughability: As the belt body has no transverse skeleton, it is easy to from a deep trough, so the belts can load more materials and prevent the materials from escaping.
8. Inspection of the belt with X-rays: Users can take X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
| Strength grade | Tensile strength (KN/m) |
Cord pitch (mm) |
Cord diameter (mm) |
Min.breaking force (KN) |
Min.cover thickness (mm) |
| ST-500 | 500 | 10 | 2.5 | 5.5 | 4 |
| ST-630 | 630 | 10 | 2.8 | 7 | 4 |
| ST-800 | 800 | 10 | 3 | 8.9 | 4 |
| ST-1000 | 1000 | 12 | 3.7 | 12.9 | 4 |
| ST-1250 | 1250 | 12 | 4.2 | 16.1 | 4 |
| ST-1400 | 1400 | 12 | 4.3 | 18 | 4 |
| ST-1600 | 1600 | 12 | 4.7 | 20.6 | 4 |
| ST-2000 | 2000 | 12 | 5.3 | 25.6 | 4 |
| ST-2250 | 2250 | 12 | 5.3 | 29 | 4 |
| ST-2500 | 2500 | 15 | 6.8 | 40 | 5 |
| ST-2800 | 2800 | 15 | 7 | 44.8 | 5 |
| ST-3150 | 3150 | 15 | 7.8 | 50.5 | 5.5 |
| ST-3500 | 3500 | 15 | 8.2 | 56 | 6 |
| ST-4000 | 4000 | 15 | 8.8 | 63.5 | 6.5 |
| ST-4500 | 4500 | 16 | 9.7 | 76.3 | 7 |
| ST-5000 | 5000 | 17 | 10.9 | 91 | 7.5 |
| ST-5400 | 5400 | 17 | 11.3 | 98.2 | 8 |
| ST-6300 | 6300 | 19.5 | 12.8 | 130.4 | 10 |
| ST-7000 | 7000 | 19.5 | 13.5 | 142.4 | 10 |
| ST-7500 | 7500 | 21 | 13.8 | 166.7 | 10 |
| ST-8000 | 8000 | 21 | 14 | 180.9 | 10 |
| ST-9000 | 9000 | 21 | 14.8 | 203.2 | 11 |
| ST-10000 | 10000 | 21 | 15.5 | 225 | 11 |
Note: Cover thickness, cord diameter, and cord pitch can be manufactured according to customer's requirements.
| Grade | Tensile strength min (ISO37) Mpa |
Elongation at break min (1SO37) % |
Abrasion Max. (IS04649) mm3 |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
| Ka | 15 | 350 | 200 |
| Note:Ka for flame-resistant and anti-static belts in accordance with ISO340 and ISO284 | |||
Flame Resistant Steel Cord Conveyor Belt for General Use |
It's especially used in aboveground coal washeries, power plants, and non-coal underground mining. For general use with electrical and fire safety requirements to EN 12882.
The product is made of nylon canvas or EP canvas and finished through the processes of calendering, assembling, vulcanizing, etc. The unique formula enables it to work continuously in a flammable environment.
| Items | Flame resistant grade | |
| K2 | K3 | |
Duration of flame |
The total duration of flame of 6 test pieces with covers is less than 45S,any individual test piece does not exceed 15 S |
Average value of duration of flame of 3 test pieces with covers does not exceed 60S |
| Anti-static property | ≤3×108Ω | |
Reapperance |
There should be no reappearance of flame on any test piece |
|
Flame Resistant Steel Cord Conveyor Belt for Underground Use |
Steel Cord Flame Resistant Conveyor Belts are suitable for conveying materials in flame resistant and anti-explosion occasions, especially in underground coalmines.
Except the advantages of conveying materials at the occasion of high strength, long distance and large load as the steel cord conveyor belt, the steel cord flame resistant conveyor belt shall meet the safety requirements below.
| ltems | indexes | ||
| Anti-static property | Average electrical resistance of both surfaces (Ω) | 3*108 | |
| Dram friction | Surface temperature of drum (C) | ≤325 | |
| Any test piece shall not show any sign of flame or glow | |||
| Burning on spirit burner (flame or glow) |
Burning with cover rubber |
Average duration of lame for six test pieces(S) | ≤3 |
| Duration of flame for any individual test piece(S) | ≤10 | ||
| BURNING WITHOUT COVER REBBER |
Average duration of flame for six test piece(S) | ≤5 | |
| Duration of flame for any individual test piece(S) | ≤15 | ||
| Buming on propane bumer |
Length that is completely undamaged by flame .mm | 2250 mm | |
Flame resistance for mines: suitable for conveying flammable and combustible dangerous materials. The average value of burning test shall be less than 10s, and the single value shall be less than 15s. Besides, it has to pass the drum friction test and tunnel propane combustion test.
| Standard | Tensile strength min Mpa |
Elongation at break min % |
Abrasion Max mm |
| MT668 | 15 | 350 | 200 |
EN14973 C1 Class- We have the Certificate CE/ C1/ A
Steel Cord PIPE Conveyor Belt |
Steel cord pipe conveyor belt is a new type of conveying belt which uses steel cord as carcass, high elastic, high anti-abrasive and high strength rubber as working surface. It's mainly used in conveying materials which are easily polluted like power, granular materials, etc. when working, the rubber belt changes its form from flat to U shape and finally to pipe, folding the materials and realizing the process of enclosed conveying.
Enclosed conveying of materials, protecting both the materials and the environment.
Steep angled conveying, the conveying angle can reach 30° usually.
Conveying line can be arranged according to the curve of space.
| Strength grade |
Tensile strength (KN/m) |
Cord pitch (mm) |
Cord diameter (mm) |
Cord min. breaking force (KN) |
Cover min. thickness (mm) |
| ST-630 | 630 | 10 | 2.8 | 7.0 | 4.0 |
| ST-800 | 800 | 10 | 3.0 | 8.9 | 4.0 |
| ST-1000 | 1000 | 12 | 3.7 | 12.9 | 4.0 |
| ST-1250 | 1250 | 12 | 4.2 | 16.1 | 4.0 |
| ST-1600 | 1600 | 12 | 4.7 | 20.6 | 4.0 |
| ST-2000 | 2000 | 12 | 5.3 | 25.6 | 4.0 |
| ST-2500 | 2500 | 15 | 6.8 | 40.0 | 5.0 |
| ST-2800 | 2800 | 15 | 7.0 | 44.8 | 5.0 |
| ST-3150 | 3150 | 15 | 7.8 | 50.5 | 5.5 |
| ST-3500 | 3500 | 15 | 8.2 | 56.0 | 6.0 |
| ST-4000 | 4000 | 15 | 8.8 | 63.5 | 6.5 |
| ST-4500 | 4500 | 16 | 9.7 | 76.3 | 7.0 |
| ST-5000 | 5000 | 17 | 10.9 | 91.0 | 7.5 |
| ST-5400 | 5400 | 17 | 11.3 | 98.2 | 8.0 |
| Nominal pipe diameter (mm) |
φ200 | φ250 | φ300 | φ350 | φ400 | φ500 | φ600 | φ700 | φ800 |
| Width(mm | 800 | 1000 | 1100 | 1300 | 1600 | 1850 | 2250 | 2450 | 2800 |
In accordance with HG4224-2011 standard/
| Grade | Tensile strength min Mpa |
Elongation at break min % |
Abrasion max mm |
| H | 25 | 450 | 120 |
| D | 18 | 400 | 90 |
| L | 20 | 400 | 150 |
| Ozone resistant test condition:50pphm, 40±2ºC,elongation: 20%, time:96hours, no cracks | |||
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Heat Resistant, High Temperature Resistant Steel Cord Conveyor Belt |
It is suitable for conveying high temperature solid materials like sintering ore, coke, cement clinker, etc. which is used in metallurgical, cement, chemical industry and so on.
Developed new structure carcass materials will reduce the strength loss of heat aging during running, and thus will extend the working life.
The cover uses superior ethylene-propylene rubber or halogenate rubber which will enhance the high temperature resistant property of the rubber and reduce the loss of heat aging.
| Strength grade |
Tensile strength (KN/m) |
Cord pitch (mm) |
Cord diameter (mm) |
Min,breaking force (KN) |
Min.cover thickness (mm) |
| ST-500 | 500 | 10 | 2.5 | 5.5 | 4.0 |
| ST-630 | 630 | 10 | 2.8 | 7.0 | 4.0 |
| ST-800 | 800 | 10 | 3.0 | 8.9 | 4.0 |
| ST-1000 | 1000 | 12 | 3.7 | 12.9 | 4.0 |
| ST-1250 | 1250 | 12 | 4.2 | 16.1 | 4.0 |
| ST-1400 | 1400 | 12 | 4.3 | 18.0 | 4.0 |
| ST-1600 | 1600 | 12 | 4.7 | 20.6 | 4.0 |
| ST-2000 | 2000 | 12 | 5.3 | 25.6 | 4.0 |
| ST-2250 | 2250 | 12 | 5.3 | 29.0 | 4.0 |
| ST-2500 | 2500 | 15 | 6.8 | 40.0 | 5.0 |
| ST-2800 | 2800 | 15 | 7.0 | 44.8 | 5.0 |
| ST-3150 | 3150 | 15 | 7.8 | 50.5 | 5.5 |
| ST-3500 | 3500 | 15 | 8.2 | 56.0 | 6.0 |
Note: Cover thickness, cord diameter, and cord pitch can be manufactured according to customer's requirements.
| Item | GB20021Standard | ZHENXING Standard | |||||
| T1 | T2 | T3 | T4 | DAHR150 | DAHR180 | ||
| Test temperature | |||||||
| ≤100ºC | ≤125ºC | ≤150ºC | ≤175*ºC | ≤150*ºC | ≤180ºC | ||
| Permitted change range | |||||||
| Hardness | Difference before and after aging |
+20 | +20 | ±20 | ±20 | ±10 | ±10 |
| Maximum after aging | 85 | 85 | 85 | 85 | 75 | 75 | |
| Tensile strength |
Change rate of property % | 25 | 30 | 40 | 40 | ±15 | ±25 |
| Minimum value after aging | 12 | 10 | 5 | 5 | 10 | 8 | |
| Elongation at break |
Change rate after aging % | 50 | 50 | 55 | 55 | ±15 | ±15 |
| Minimum value after aging | 200 | 200 | 180 | 180 | 400 | 350 | |
Oil Resistant Steel Cord Conveyor Belt |
Oil resistant conveyor belts select the NBR with excellent oil resistant properties as the covers. The reinforced materials can be selected according to customers' requirements. It's suitable for conveying oily materials or the environment that exposure to a variety of working oil.
Low rate of volume change
High maintenance of strength
Wide application ranges
| Type | Rubber material | Permissible temperature ºC |
Application areas |
| COR | NBR/BR | 35~70 | Conveying products containing animal and vegetable oil and fat in cold areas |
| MOR | NBR/SBR | -20~70 | Most products containing animal and vegetable oil and fat |
| OR | NBR | 20~70 | Products containing mineral oi |
| HOR | NBR | 20~120 | Hot asphalt |
IW/SW Steel Mesh Conveyor Belt (NEW) |
Applying IW/SW steel mesh to conveyor belting as carcass makes the belt with great anti-tear properties which will effectively prevent being pierced and with good performance in heat resistance. IW conveyor belt is suitable for ore handling, quarries, coal and ore terminals which requiring impact resistant and anti-tear properties; metallurgical sintering and coke plants requiring high temperature resistant properties; and bucket wheel machine handling which requiring high flexibility. SW conveyor belt is suitable for vertical conveying materials, which is widely used in metallurgy, chemical industries, cement, electricity, grain, etc.
1. Structure of special materials provides excellent anti-tear properties
The IW/SW steel mesh structure will make the conveyor belt meet great anti-tear properties which can effectively prevent against being pierced.
2. Excellent impact resistant performance
The IW/SW steel mesh uses elongation type steel in warp and high elongation steel in weft. The outstanding extension of the material will absorb more impact energy and thus provide excellent impact resistant performance.
3. Various cover types
Various types of rubber cover can meet different conditions. High temperature resistant rubber cover has excellent performance in conveying materials under high temperature conditions. But the conveying distance is better to be less than 2km.
| IW Steel Mesh Conveyor Belt Technical Parameters | ||||||||
| Type | Tensile strength KN/m |
Carcass thickness mm |
Carcass weight Kg/m |
Cord diameter in warp mm |
Cord pitch in warp mm |
Cord diameter in weft mo |
Cord pitch in wef mm |
Min.cove thickness (mm) |
| W500 | 500 | 3.2 | 2.45 | 2.00 | 5.81 | 1.52 | 17.5 | 2.5 |
| W630 | 630 | 3.2 | 2.95 | 2.00 | 4.63 | 1.52 | 17.5 | 2.5 |
| W800 | 800 | 4.5 | 4.15 | 2.85 | 6.67 | 2.10 | 20.0 | 3.0 |
| W1000 | 1000 | 4.5 | 5.00 | 2.85 | 5.38 | 2.10 | 20.0 | 3.0 |
| IW1250 | 1250 | 6.0 | 6.35 | 3.90 | 7.04 | 2.40 | 20.0 | 3.5 |
| W1400 | 1400 | 6.0 | 7.05 | 3.90 | 6.25 | 2.40 | 20.0 | 3.5 |
| W1600 | 1600 | 6.0 | 7.90 | 3.90 | 5.50 | 2.40 | 20.0 | 3.5 |
| W2000 | 2000 | 6.0 | 8.50 | 3.90 | 4.65 | 2.40 | 20.0 | 3.5 |
| SW Steel Mesh Conveyor Belt Technical Parameters | ||||||||
| Type | Tensile strength KN/m |
Carcass thickness mm |
Carcass weight Kglm |
Cord diameter in Warp mm |
Cord pitch in warp mm |
Cord diameter in weft mm |
Cord pitch in Wef mm |
Min.cove thickness (mm) |
| SW500 | 500 | 4.6 | 3.10 | 2.00 | 5.81 | 1.29 | 6.67 | 2.5 |
| SW630 | 630 | 4.6 | 3.60 | 2.00 | 4.63 | 1.29 | 6.67 | 2.5 |
| SW800 | 800 | 5.4 | 4.55 | 2.85 | 6.67 | 1.29 | 6.67 | 3.0 |
| SW1000 | 1000 | 5.4 | 5.40 | 2.85 | 5.38 | 1.29 | 6.67 | 3.0 |
| SW1250 | 1250 | 6.3 | 6.50 | 3.90 | 7.04 | 1.29 | 6.67 | 3.5 |
| SW1400 | 1400 | 6.3 | 7.25 | 3.90 | 6.25 | 1.29 | 6.67 | 3.5 |
| SW1600 | 1600 | 6.3 | 8.10 | 3.90 | 5.50 | 1.29 | 6.67 | 3.5 |
| SW2000 | 2000 | 6.3 | 9.30 | 3.90 | 4.65 | 1.29 | 6.67 | 3.5 |
In accordance with ISO15236-2016 standard
| Grade | Tensile strength min (ISO37) Mpa |
Elongation at break min (1SO37) % |
Abrasion Max. (IS04649) mm3 |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
| Ka | 15 | 350 | 200 |
| Note:Ka for flame-resistant and anti-static belts in accordance with ISO340 and ISO284 | |||
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
|
2. Solid Woven CONVEYOR BELT
|
It's mainly used for conveying materials in underground coalmines, which can be divided into PVC type and PVG type. For the PVC type, both the top and bottom cover is PVC rubber cover, with the coating rubber thickness of ≥0.8mm and at a slope angle of <16°; For the PVG type, both the top and bottom cover is rubber blends PVC, with the coating rubber thickness of 1.5~4.5mm,and at a slope angle of <20°.
The belt, with great flame resistant and anti-static properties, can fully satisfy the requirements of MT914-2008. The belt uses high strength, low elongation, high quality polyester filament in warp, and high strength, moderate modulus nylon filament in weft. So that the fabric has advantages like high strength, low elongation, light carcass, free of separation of plies, shock resistant, anti-tear, good troughability and so on.
PVG type is covered with covers mainly composed of rubber, which further improves the troughability, resistance to wetness and slip, resistance to low temperature, elongation and wear resistance of the belt. Thus it can not only enhance the slope angle of conveying but also elongate life of belt.
| Strength grade | Tensile strength in warp(Min.) |
Cover grade and recommended thickness (mm) |
Belt width (mm) |
|
| PVC | PVG | |||
| 680s/Grade4 | 680 | 0.8+0.8 | 1.5+1.5 | 650~1600 |
| 800s/Grade5 | 800 | 0.8+0.8 | 1.5+1.5 | |
| 1000s/Grade6 | 1000 | 0.8+0.8 | 1.5+1.5 | |
| 1250s/Grade7 | 1250 | 0.8+0.8 | 1.5+1.5 | |
| 1400s/Grade8 | 1400 | 0.8+0.8 | 1.5+1.5 | |
| 1600s/Grade9 | 1600 | 0.8+0.8 | 2+2 | |
| 1800s/Grade10 | 1800 | 0.8+0.8 | 2+2 | |
| 2000s/Grade11 | 2000 | 0.8+0.8 | 2+2 | |
| 2240s/Grade12 | 2240 | 0.8+0.8 | 2+2 | |
| Standard | Tensile strength Mpa |
Elongation at break % |
Abrasion mm |
| MT914 | 10 | 350 | 200 |
| Items | Indexes | ||
| Anti-static property | Average electrical resistance of both surfaces(Ω) | 3.0*108 | |
| Drum friction | Surface temperature of drum(ºC ) | ≤325 | |
| Any test piece shall not show any sign of flame or glow | |||
| Burning on spirit burner (flame or glow) |
Burning with cove rubber |
Average duration of lame for six test pieces(S)
|
≤3 |
| Duration of flame for any individual test piece(S | ≤10 | ||
| BURNING WITHOUT COVER REBBER |
Average duration of flame for six test piece(S) | ≤5 | |
| Duration of flame for any individual test piece(S) | ≤15 | ||
|
Burning on
propane burne |
Length that is completely undamaged by flame .mm | >250 mm | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}