| Type: | St630n/mm--6000n/mm |
|---|---|
| Material: | Steel |
| Inside Material: | Fabric |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant |
| Tensile Strength: | Strong |
| Strength: | 630n/mm--6000n/mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Steel Cord Conveyor Belt
Features
• High tensile strength:Steel cord conveyor belt is suitable for large span,long distance transportation of materials Small elongation in use:
It need only a very short take-up stroke distance.
• Small diameter of drive pulley:Steel cord conveyor belt body has a layer of longitudinally arranged steel cords as its carcass,and thus is resistant to flex fatigue.
Therefore,drive pulley of smaller diameter can be used to make the equipment smaller.
• High adhesion between rubber and steel cord:The steel cords are coated with zinc on their surface,and also the rubber used has the property of good adhesion with steel cords.
Therefore,the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop,so the rubber belts are long in life.
• Even tension of steel cords:Out of our advanced techniques in manufacturing,the steel cords are very evenly arranged and have the same tension,
so the belts are well balanced in running and difficult to run away.
• Good troughability: As the belt body has no transverse skeleton,it is easy to from a deep trough,so the belts can load more materials and prevent the materials from escaping.
• Inspection of the belt with X-rays: Users can X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
• Cover Compounds: General, Fire-resistant, Cold-resistant, Abrasion-resistant, Heat-resistant and Chemical-resistant.
| Model | ST/S630 | ST/S800 | ST/S1000 | ST/S1250 | ST/S1600 | ST/S2000 | ST/S2500 | ST/S2800 | ST/S3150 |
| Thickness of top rubber cover≥ | 5 | 5 | 6 | 6 | 6 | 8 | 8 | 8 | 8 |
| Thickness of bottom rubber cover≥ | 5 | 5 | 6 | 6 | 6 | 8 | 8 | 8 | 8 |
| Model | ST/S630 | ST/S4000 | ST/S4500 | ST/S5000 | ST/S5400 | ST/S6300 | ST/S7000 | ST/S7500 |
| Thickness of top rubber cover≥ | 8 | 8 | 8 | 8.5 | 9 | 10 | 10 | 10 |
| Thickness of bottom rubber cover≥ | 8 | 8 | 8 | 8.5 | 9 | 10 | 10 | 10 |
| Tensile Strength(Mpa)≥ | 15 | ||||
| Covering the adhesive performance | Elongation at break(%)≥ | 350 | |||
| After aging test (700Cx168h) | Tensile strength change rate(%) | ±25% | |||
| Change rate of elongation at break(%) | ±25% | ||||
| Abrasion(mm3) | 200 | ||||
| hardness(SH0A) | 70±5 | ||||
| Flame-retardant antistatic property | Drum blowtorch burning test | When each specimen is subjected to the roller friction test | The sample has no open flame or flameless combustion | ||
| Roller surface temperature ºC,≤ | 325 | ||||
| Burning test of alcohol blowtorch | Specimen with complete covering | Flaming | The average self-extinguishing time of 6 samples is not more than 3 seconds | ||
| The single value of any sample is not more than 10 seconds | |||||
| Flameless combustion | The average self-extinguishing time of 6 samples is not more than 3 seconds | ||||
| The single value of any sample is not more than 10 seconds | |||||
| Strip the cover test piece | Flaming | The average self-extinguishing time of 6 samples is not more than 3 seconds | |||
| The single value of any sample is not more than 10 seconds | |||||
| Flameless combustion | The average self-extinguishing time of 6 samples is not more than 3 seconds | ||||
| The single value of any sample is not more than 10 seconds | |||||
| Roadway propane combustion test | Full width unburnt length,mm≥ | 600 | |||
| Surface resistance value | Average surface resistance of the upper and lower sides Ω≤ | 3x108 | |||
(1)Q: Are you a factory or trading company?
A: We are a factory with an export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost, this charge will be deducted from the payment for the order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For a small sample shipping costs, you can pay either by PayPal or by T/T. And by T/T or L/C at sight for a large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A, etc?
A: Yes, we can do them for you.
(6)Q: What is your factory's main product?
| No. | Rubber Conveyor Belt |
| 1 | Conveyor Belt for General Purpose |
| 1.1 | EP(polyester) Conveyor Belt: EP100,EP125,EP150,EP200,EP250,EP300,EP400,EP500,EP630 |
| 1.2 | NN(Nylon) Conveyor Belt : NN100,NN125,NN150,NN200,NN250,NN300,NN400,NN500,NN630 |
| 1.3 | Cotton Conveyor Belt: CC-56 CC70 |
| 1.4 | Steel Cord Conveyor Belt: ST630,ST800,ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST4000,ST4500,ST5000, ST5400 |
| 2 | Conveyor Belt for Special Purpose |
| 2.1 | Heat Resistant Conveyor Belt |
| 2.2 | High-Temperature Conveyor Belt |
| 2.3 | Fire Retardant Conveyor Belt |
| 2.4 | Cold Resistant Conveyor Belt |
| 2.5 | Oil Resistant Conveyor Belt |
| 2.6 | Chemical Resistant Conveyor Belt |
| 3 | Chevron (PaConveyor Belt |
| 4 | Bucket Elevator Conveyor Belt |
| 5 | Sidewall Conveyor Belt |
| 6 | Flat Transmission Belt |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}