| Type: | EP200 |
|---|---|
| Material: | Rubber |
| Inside Material: | Polyester |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Heat /Oil / Chevron / Steal Cord etc |
| Tensile Strength: | Strong |
| General Name: | Rubber Conveyor Belt |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Solid Woven Belt TECHNICAL SPECIFICATION | ||||
| Specifications | PVG800 1000(6+4) | |||
| Standard | MT914 | |||
| 1 | Length | m | 2200 | |
| 2 | Edge type | / | Mould edge | |
| 3 | Belt weight | Kg/m | 22 | |
| 4 | Thickness |
Total Thickness | mm | 16±1 |
| Top cover | mm | 6±0.5 | ||
| Bottom cover | mm | 4±0.2 | ||
| 5 | Cover performance |
strength | Original | ≥10Mpa |
| Rate of change after aged %(70 ºC×168h) |
±25 | |||
| Elongation at break | Original | ≥350% | ||
| Rate of change after aged %(70 ºC×168h) |
±25 | |||
| Abrasion loss | ≤200mm3 | |||
| 6 | Belt rating | warp | ≥800 | |
| 7 | Elongation | warp | (min)≥15% | |
| Elongation @ 10% | ≤4.0% | |||
| 8 | Cover & ply | Cover to carcass | ≥3.25N/mm | |
| Adhesion | Carcass | ≥6.5N/mm | ||
| 9 | Tearing strength | ≥1200N | ||
| 10 | Cover stastic property | ≤3.0×108Ω | ||
| 11 | Flame resistant | |||
| 11.1 | Drum friction | ≤325ºC | ||
| 11.2 | Alcohol blast burner | |||
| a | For test pieces with the complete covering layer, the arithmetic average of the time of burning with flame and the arithmetic average of the time of burning without flame on all the test pieces should not be greater than 3.0s. And, the single value of the time of burning with or without flame on each test piece should not be greater 10.0s. | |||
| b | For test pieces with the covering layer stripped off, the arithmetic average of the time of burning with flame and the arithmetic average of the time of burning without flame on all the test pieces should not be greater than 5.0s. And, the single value of the time of burning with or without flame on each test piece should not be greater 15.0s. | |||
| 11.3 | The propane burning in the lane For each test piece, if it meets any one of the two requirements in the following, The fire resistant belt is deemed as in conformity. The requirements are as follows: |
|||
| a | The undamaged length of each test piece should not be less than 600mm. | |||
| b | The undamaged length should not be less than 50mm, the maximum of the average temperature rise should not be more than 140ºC and the lost length of the belt not more than 1250mm. | |||
| If the test is earlier terminated in the burning process as it posed risk to the people and equipment, the propane burning test in the lane of the fire resistant belt shall be deemed as failure. | ||||
|
12
|
Package | Belt Length Per Reel M | 270 | |
| Number of Reels | 8 | |||
| Diameter of Reel (L*W*H) | 2.4*1.3*2.5 | |||
| Net Weight Per Wheel Kg | 5940 | |||
| Gross Weight Per Reel Kg | 6740 | |||
Q1: What types of Conveyor Belt you can Produce?
A: Hello,Dear We can produce Sidewall,Flat,Chevron,Steel Cord Conveyor Belt,Heat Resistant,
Oil Resistant,Acid-Alkali Resistant Cold Resistant and PIPE Conveyor Belt etc.
Q2:Does your Company have ISO Certificate?
A: Yes of course we have ISO9001:2008 Certificate.
Q3:Can you Provide FORM E Certificate of Origin for us?
A: Yes we can do Normal CO,FROM E,FROM F,FORM A etc.
Q4:What is your Delivery Time?
A:Normally Within 10-20days after getting your Prepayment or L/C.
Q5:Can you give Guarantee if I buy your belt?
A:Of course,we must give Guarantee for all of our Products,Please tell me your Details of Requirement.
We will be appreciated if you can provide the following specification:
If you are not sure for any of above,we can recommend for you.WELCOME INQUIRY US
Once we get above information we will quote exact price at soonest time.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}