International Standard Solid Woven Conveyor Belt

• Type: PVC / Pvg
• Material: PVC
• Inside Material: Fabric
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: T680S/T800S/T1000S/T1250S/T1400S/T1600S/T1800S
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Flame Retardant
• Tensile Strength: Strong
• Classification: Conveyor Belt Sold Woven PVC Pvg Conveyor Belt
• Spec: 680s. 800s 1000s 1250s1400s1600s1800s
• Use: Coal Mines
• Standard: Mt914 Fr Flame Resardant Conveyor Belt
• Customization: Available
• Transport Package: PE Package
• Trademark: ZHENXING
• Origin: Shandong, China
• HS Code: 40101200
• Production Capacity: 15000meters/Week
• Package Size: 100.00cm * 800.00cm * 180.00cm
• Package Gross Weight: 1976.000kg

Product Description

Product Description

SOLID WOVEN CONVEYOR BELT

Main features: The belt core designed and woven by our own company. After being impregnated with PVC paste and plasticized at high temperature (or vulcanized by flat plate), the whole belt has no delamination, small elongation, impact resistance, tear resistance and good mechanical joint performance.

Applicable industry: suitable for conveying materials in mines, coal mines and so on. PVC type conveyor belt: suitable for the angle of 16 degrees below the dry conditions of the environment; PVG type conveyor belt with rubber surface and solid woven: suitable for wet and water environment with dip angle below 20 degrees.
 

It's mainly used for conveying materials in underground coalmines, which can be divided into PVC type and PVG type. For the PVC type, both the top and bottom cover is PVC rubber cover, with the coating rubber thickness of ≥0.8mm and at a slope angle of <16°; For the PVG type, both the top and bottom cover is rubber blends PVC, with the coating rubber thickness of 1.5~4.5mm,and at a slope angle of <20°.

 

The belt, with great flame resistant and anti-static properties, can fully satisfy the requirements of MT914-2008. The belt uses high strength, low elongation, high quality polyester filament in warp, and high strength, moderate modulus nylon filament in weft. So that the fabric has advantages like high strength, low elongation, light carcass, free of separation of plies, shock resistant, anti-tear, good troughability and so on.

PVG type is covered with covers mainly composed of rubber, which further improves the troughability, resistance to wetness and slip, resistance to low temperature, elongation and wear resistance of the belt. Thus it can not only enhance the slope angle of conveying but also elongate life of belt.

Product Parameters

1.Model:  N/mm(Tensile Strength)

Grade :4,5,6,7,8,9,10
Type :680S,800S,1000S,1250S,1400S,1600S,1800S 2000S 2250S 2500S

 2. Flame Retardancy
(1) Grinding number of drum: the surface temperature of the drum shall not be greater than 325 ºC
(2) Blowtorch combustion: the average time for full-thickness specimen to blowtorch without flame shall not be greater than 3.0s, and the average time for covering layer removal shall not be greater than 5.0S
(3) Propane combustion: Nondestructive length greater than 2250mm
 

Table of Structure and Performance
Structure and Performance	Domestic Conven Solid Woven Belts	International Conventional Solid Woven Belts	SWR Solid Woven Fire Resistance Belts
Carcass	NN/EE+CC	NN/EE+CC	NN/EE/EP/KF
Cover	PVC/PVG+RUBBER	PVC/PVG+RUBBER	High Polymer+RUBBER
Abrasion(mm3)	200	200	150
Tensile Strength(Mpa)	15	15	20
Elongation(%)	350	350	400
Cover Thickness(mm)	5+3	4+2	12
Troughability	Fair	Good	Excellent
Pulley Diameter	Big	Medium	Small
Production Process	Carcass PVC Plasticizer	Carcass PVC Plasticizer	High Ploymer&Namo-Bonding System
Life	1 year	1.5 years	5 years

3. Safety Performance
The conveyor belt has passed the flame retardant test and electrostatic test and obtained the certificate, coal safety mark, and customer recognition.
This product is made of an integral belt core as skeleton material, which is plasticized after impregnating and coating PVC material with excellent antistatic and flame retardant properties.

Safety performance
Surface resistance average	≤3×10^8Ω ≤3×10^8Ω
Drum friction property	The temperature is no more than 325ºC and shall not appear as flame or no fire burning.
Alcohol blast burner burning test	With cover: Average≤ 3S, individual ≤ 10S Without cover: Average≤ 5S, individual ≤ 15S

 4.Tensile strength N/mm

type	680S	800S	1000S	1250S	1400S	1600S	1800S	2000S	2240S	2500S
warp	680	800	1000	1250	1400	1600	1800	2000	2240	2500
weft	265	280	300	350		400			450

Quality Control

PVC PVG :Experiment and Test

(1)Drum friction test

When each specimen is subjected to the drum friction test, flame-burning and flameless combustion phenomenon shall not occur in any part of it, and the surface temperature of the drum shall not be greater than 325ºC
(2)Alcohol torch combustion test:

The test pieces shall comply with the following provisions after the alcohol torch combustion test:

A)For 6 specimens with complete covering layer, after the blowtorch is removed, the arithmetic mean of flame-burning time and flame-free combustion time on all specimens shall not be greater than 3.0s.The single value of flame-free combustion time and flame-free combustion time on each specimen shall not be greater than 10.0s.
B)For 18 specimens with the overburden stripped off, after the blowtorch is removed, the arithmetic mean of flame-burning time and flame-free combustion time on all specimens shall not be greater than 5.0s.The single value of flaming combustion time and flameless combustion time on each specimen shall not be greater than 15.0s.

 

Certifications

Packaging & Shipping

 

 

Company Profile

 

1.Our adavantages

Founded in 1980, Shandong Weifang Zhenxing Group has more than 40 years of production experience. We are a large-scale comprehensive joint-stock enterprise with myriad industries and diversified operations. Adhering to the business philosophy of"Innovation & Progress, Multi- cooperation, High Quality, Credible Service, Mutual Benefit, Brilliant Future" and the quality policy of "Survival by Quality, Development by Reputation", we strive to develop high-quality products. Our business involves international trade, rubber conveyor belt manufacturing, plastic packaging product design, and production, large automobile maintenance, etc. Weifang Zhenxing Rubber Co.Ltd. covers an area of 80,000m2, with both output value and assets of over 100 million yuan. We have always been in line with the purpose of "Customer First, Remarkable Performance" to serve our customers wholeheartedly.

 

2.Diversified products

The main products are various types of conveyor belts including conveyor belts of general cotton canvas, nylon (NN), polyester (EP) whole core (PVC, PVG), steel cord, high-temperature resistance, acid and alkali resistance,anti-static, fire resistance, oil resistance, cold resistance, high strength, and high wear-resistant conveyor belt high-intensity corrugated sidewall conveyor belt, and pattern conveyor belt. Special pattern models and various types of conveyor belts can also be manufactured according to customers' requirements.

The products have excellent shock resistance, abrasion resistance, high strength ductility, and long service life, which can better meet the demands of the transport of materials in such industries as large coal mines, metallurgy, chemical industry, port, and so on.
 

3.International production standards

In addition to the production according to the relevant national standards, according to the different technical requirements of foreign users, the company can also refer to the German DIN standard, British BS3289 standard, Japan JIS standard, the United States RMA standard organization production.

FAQ

(1)Q: Are you a factory or trading company?
A: We are a factory with an export license. We have the most convenient transportation conditions.

(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost, this charge will be deducted from the payment for the order.

(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.

(4)Q: How can we pay?
A: For a small sample shipping costs, you can pay either by PayPal or by T/T. And by T/T or L/C at sight for a large amount of the order.

(5)Q: Can you do CO, Form E, Form F, Form A, etc? 
A: Yes, we can do them for you.

(6)Q: What is your factory's main product?