Heavy Industrial Use High Quality Ep500 Endless Corrugated Sidewall DIP-Angle Conveyor Belting

• Type: EP250
• Material: Rubber
• Inside Material: Fabric
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Sidewall conveyor belt
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Base Belt: Multi-Ply(Ep/Nn/Cc) Fabric Type or Stee
• Sidewall Type: N, S, and Es Type
• Cleat Type: T, C, Tc, Ts and Tcs Type
• Sidewall Height: 60-300mm
• Cleat Height: 50-280mm
• Advantage: Less Space Requirement Low Maintenance Cost
• Conveys Height: 0-90
• Classification: Rubber Conveyor Belt
• Transport Package: Steel Shelf
• Specification: S 120 TC 110
• Trademark: ZHENXING
• Origin: Shandong, China
• HS Code: 40101200
• Production Capacity: 100meters/Day
• Package Size: 180.00cm * 120.00cm * 180.00cm
• Package Gross Weight: 1976.000kg

Product Description

SIDEWALL CONVEYOR BELT

Description
Corrugated Sidewall Conveyor Belt is one of the most effective ways of elevating materials in aconfined space, the economy is achieved by single belt operation, wide range material can be handled, less space requirement,no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be designed into a set of complete transportation system according to application.

Structure
Sidewall conveyor belt consists of base belt, sidewalls and cleats. There are usually transverse steel wire reinforcement inside top & bottom covers of the base belt.
-Cleat types: TC
The cleat is made of enforced fabric, solid, anti-shock to avoid distortion. 
"TC"  normally used from 0 degree to 90

Cleat
Cleat types: T, TC
The cleat is made of enforced fabric, solid, anti-shock to avoid distortion. 
"T" cleat are normally used up to 40 degree
"TC"  normally used from 0 degree to 90

 

Properties of cleat conveyor belt
Corrugated sidewall belts for transport of bulk goods
Saves space, since conveyance at inclines of up to 90° Is possible
Material conveyed is protected
Extremely high stability is provided in the traverse direction, good longitudinal flexibility
Different feed and discharge directions are possible by rotating the vertical runs

Standard
GB/T7984, HG/T4602, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc

Application
Sidewall Conveyor Belt (Steep angle sidewall conveyor belts) is normally used to bulk materials at inclines of up to 90 degree in fields of construction industry, salt mining, stones and earth, fertilizer, chemical industry, recycling industry, agriculture. 
It also used together with belt conveyor for horizontal & short-distance transportation. (no cleats the moment)

Detailed Photo

 

 

Packaging & Shipping

Our Conveyor Belts leave the production line packed in such a way as to ensure safe transportation. It is important to always lift the steel crate from underneath by strapes or chains when handling it. Do not lift the crate at any other points as damage may result
It is essential that when offloading and unpacking the belt that the utmost care be taken not to damage the belt. The belt should be unpacked as the following sketches, it is most important that under NO CIRCUMSTANCES should a steel cable or rope be used to lift the belt either out of a crate or onto the conveyor.

 

In order to protect sidewall conveyor belt properly, it must be stored in steel crate or container do sport until installation.

The belt should be stored in a place that dry, away from direct sunlight thermal environment.

Long-term temperature variation will cause adverse effect to belt.The ideal storage environment for temperature is between 10-21 degrees celsius. It will make the belt sclerosis or curing if it is long-term exposed to temperature of lower than 5 degree, which will cause the belt offtrack after installation and what's more, to impact the operation effect and belt service life
 

 

 

 

 

FAQ

Q1. Are you a manufacturer?

Yes, we have mainly produced Rubber conveyor belts for over 40 years.

Q2. What about the lead time?
1) 3--5 days for sample
2) 20--25 days for mass production. If urgent, we have the green channel.

Q3. How to pay?
T/T or L/C

Q4. How about the package?
Steep angle cleat conveyor belts are packed with an iron frame shelves.