| Type: | St630n/mm--6000n/mm |
|---|---|
| Material: | Steel |
| Inside Material: | Fabric |
| Feature: | Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant |
| Tensile Strength: | Strong |
| Strength: | 630n/mm--6000n/mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Steel Cord Conveyor Belt
Advantage
1. Light weight, high strength, can withstand impact loads.
2. Good flexibility and flexible use.
3. After the wire rope is worn, there will be many burrs on the outside, which is easy to check. There is a sign of broken wire before breaking, and the whole wire rope will not break immediately.
4. The cost of wire ropes for lifting operations is low.
Features
1)High tension,it's tension is three times as large as that of NN/EP rubber conveyor belt.
2)Short take-up travel for small elongation.
3)Good trough ability.Flexible and suitable for the idler with straight run.
4)Good performance,long service life.The single-layer structure,good resistance to flexural fatigue and strong rubber adhesion to the steel cords enable the ST conveyor belts to run at a higher speed than fabric belts.
5)Strong splice,excellent splice efficiency can be obtained by the overlap splicing method.
6)Internal inspection possible.Any damage can be identified though methods such as X-ray photography and to take appropriate measures.
7)Cover rubber,filled with ST or fiber,the rip resistance improved.
| Tensile Strength(Mpa)≥ | 15 | ||||
| Covering the adhesive performance | Elongation at break(%)≥ | 350 | |||
| After aging test (700Cx168h) | Tensile strength change rate(%) | ±25% | |||
| Change rate of elongation at break(%) | ±25% | ||||
| Abrasion(mm3) | 200 | ||||
| hardness(SH0A) | 70±5 | ||||
| Flame-retardant antistatic property | Drum blowtorch burning test | When each specimen is subjected to the roller friction test | The sample has no open flame or flameless combustion | ||
| Roller surface temperature ºC,≤ | 325 | ||||
| Burning test of alcohol blowtorch | Specimen with complete covering | Flaming | The average self-extinguishing time of 6 samples is not more than 3 seconds | ||
| The single value of any sample is not more than 10 seconds | |||||
| Flameless combustion | The average self-extinguishing time of 6 samples is not more than 3 seconds | ||||
| The single value of any sample is not more than 10 seconds | |||||
| Strip the cover test piece | Flaming | The average self-extinguishing time of 6 samples is not more than 3 seconds | |||
| The single value of any sample is not more than 10 seconds | |||||
| Flameless combustion | The average self-extinguishing time of 6 samples is not more than 3 seconds | ||||
| The single value of any sample is not more than 10 seconds | |||||
| Roadway propane combustion test | Full width unburnt length,mm≥ | 600 | |||
| Surface resistance value | Average surface resistance of the upper and lower sides Ω≤ | 3x108 | |||
|
Belt Strength(ST-NO.)
|
Max Cord diameter
(mm)
|
Composition
|
Pitch(mm)
|
Standard Working tension
(N/mm)
|
Standard cover Thickness
+1+2(mm)
|
Belt weight
(kg/m2)
|
Min.
pulley diameter(mm)
|
Cord strength KN/piece
|
|
st-630
|
3.0
|
K6*7+IWS
|
10
|
90
|
5*5
|
20.0
|
800
|
6.93
|
|
st-800
|
3.5
|
K6*7+IWS
|
10
|
110
|
5*5
|
20.6
|
800
|
8.8
|
|
st-1000
|
4.0
|
K6*7+IWS
|
12
|
140
|
6*6
|
24.7
|
800
|
13.2
|
|
st-1250
|
4.5
|
K6*7+IWS
|
12
|
175
|
6*6
|
25.4
|
800
|
16.5
|
|
st-1600
|
5.0
|
K6*19+IWS
|
12
|
225
|
6*6
|
26.0
|
1000
|
21.12
|
|
st-2000
|
6.0
|
K6*19+IWS
|
12
|
285
|
8*6
|
30.0
|
1000
|
26.4
|
|
st-2500
|
7.2
|
K6*19W+IWS
|
15
|
355
|
8*6
|
32.2
|
1250
|
41.25
|
|
st-3150
|
8.1
|
K6*19W+IWS
|
15
|
450
|
8*8
|
35.7
|
1400
|
51.98
|
|
st-3500
|
8.6
|
K6*19W+IWS
|
15
|
500
|
8*8
|
44.9
|
1500
|
57.7
|
|
st-4000
|
8.9
|
K6*19W+IWS
|
15
|
570
|
8*8
|
46.6
|
1600
|
66
|
|
st-4500
|
9.7
|
K6*19W+IWS
|
16
|
645
|
8*8
|
49.0
|
1800
|
79.2
|
|
st-5000
|
10.9
|
K6*19W+IWS
|
17
|
715
|
8.5*8.5
|
53.6
|
1800
|
93.5
|
|
st-5400
|
11.3
|
K6*19W+IWS
|
17
|
760
|
9*9
|
57.5
|
2000
|
101
|
Drum Friction Test Machine Physical Laboratory Aging Oven
Strength Test Machine Mooney Viscometer Chemical Laboratory
(1)Q: Are you a factory or trading company?
A: We are a factory with an export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost, this charge will be deducted from the payment for the order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For a small sample shipping costs, you can pay either by PayPal or by T/T. And by T/T or L/C at sight for a large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A, etc?
A: Yes, we can do them for you.
(6)Q: What is your factory's main product?
| No. | Rubber Conveyor Belt |
| 1 | Conveyor Belt for General Purpose |
| 1.1 | EP(polyester) Conveyor Belt: EP100,EP125,EP150,EP200,EP250,EP300,EP400,EP500,EP630 |
| 1.2 | NN(Nylon) Conveyor Belt : NN100,NN125,NN150,NN200,NN250,NN300,NN400,NN500,NN630 |
| 1.3 | Cotton Conveyor Belt: CC-56 CC70 |
| 1.4 | Steel Cord Conveyor Belt: ST630,ST800,ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST4000,ST4500,ST5000, ST5400 |
| 2 | Conveyor Belt for Special Purpose |
| 2.1 | Heat Resistant Conveyor Belt |
| 2.2 | High-Temperature Conveyor Belt |
| 2.3 | Fire Retardant Conveyor Belt |
| 2.4 | Cold Resistant Conveyor Belt |
| 2.5 | Oil Resistant Conveyor Belt |
| 2.6 | Chemical Resistant Conveyor Belt |
| 3 | Chevron (PaConveyor Belt |
| 4 | Bucket Elevator Conveyor Belt |
| 5 | Sidewall Conveyor Belt |
| 6 | Flat Transmission Belt |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}