Customization: | Available |
---|---|
Type: | EP200 |
Material: | Rubber |
Still deciding? Get samples of US$ 50/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: | |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.Fabric Conveyor Belt
Specifications and technical parameters of EP conveyor Belt
|
||||||||||
Fabric type |
Fabric construction |
Fabric type | Rubberized fabric thickness |
Strength series(N/mm) |
Covering rubber thickness(mm) |
Width range(mm) |
||||
warp |
Weft |
2layer |
3layer |
4layer |
Top covering adhesive |
Lower covering compound |
||||
EP | EP | NN | EP-80 | 1 | 160 | 240 | 320 | 2-30 | 1.5-20 | 300-3200 |
EP-100 | 1 | 200 | 300 | 400 | ||||||
EP-125 | 1.05 | 250 | 375 | 500 | ||||||
EP-150 | 1.1 | 300 | 450 | 600 | ||||||
EP-170 | 1.1 | 340 | 510 | 680 | ||||||
EP-200 | 1.2 | 400 | 600 | 800 | ||||||
EP-250 | 1.4 | 500 | 750 | 1000 | ||||||
EP-300 | 1.6 | 600 | 900 | 1200 | ||||||
EP-350 | 1.8 | 700 | 1050 | 1400 | ||||||
EP-400 | 1.9 | 800 | 1200 | 1600 | ||||||
EP-500 | 2.1 | 1000 | 1500 | 2000 | ||||||
EP630 | 2.4 | 1260 | 1890 | 2520 | ≤300 |
Cover grade International standard | |||||
Standards |
Cover Rubber | Adhesion | |||
Tensile Strength |
Elongation at break |
Cover to Ply |
Cover to Ply |
Ply to Ply |
|
RMA ( American-Standard) |
Mpa | % | N/mm | N/mm | N/mm |
(≤1.6mm) | (>1.6mm) | ||||
RMA-I | 17 | 400 | 3 | 4.4 | 4 |
RMA-II | 14 | 400 | 3 | 4.4 | 4 |
Standards |
Cover Rubber | Adhesion | ||||
Tensile Strength |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
|
DIN 22102 (German-standard) |
Mpa | % | mm3 | N/mm | N/mm | N/mm |
(≤1.5mm) | (>1.5mm) | |||||
DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | 5 |
DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | 5 |
DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | 5 |
DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | 5 |
Standards | Cover Rubber | Adhesion | ||||
Tensile Strength |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
|
AS 1332 (Australian -standards) |
Mpa | % | mm3 | N/mm | N/mm | N/mm |
(≤1.9mm) | (>1.9mm) | |||||
AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 |
AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 |
Standards |
Cover Rubber | Adhesion | ||||
Tensile Strength |
Elongation at break |
Abrasion |
Cover to Ply |
Cover to Ply |
Ply to Ply |
|
SANS 1173 (South-Africa-standard) |
Mpa | % | mm3 | N/mm | N/mm | |
A | 18 | 400 | 70 | 5 | 7 | |
C | 20 | 400 | 150 | 5 | 7 | |
M | 25 | 450 | 120 | 5 | 7 | |
N | 17 | 400 | 150 | 5 | 7 |
Cover grade standard | |||
C.H(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
5 | 300-1200 | 100 | 300-1200 |
5 | 465 | 154.5 | 500-800 |
5 | 665 | 154.5 | 700-750 |
5 | 765 | 154.5 | 800-900 |
5 | 965 | 154.5 | 1000-1200 |
5 | 1216 | 80 | 300-1200 |
5 | 1524 | 200 | 800-1200 |
6.5 | 1310 | 100 | ≤1200 |
7.5 | 1310 | 116 | 500-1200 |
10 | 1310 | 85.5 | 500-1200 |
10 | 300-1200 | 100 | 300-1200 |
15 | 800 | 300 | 850-1200 |
DIN22131 Cover Grade | |||
Grade | Min.Tensile strength ≥Mpa | Elongation at break ≥% | Abrasion ≤mm3 |
W | 18 | 400 | 90 |
X | 25 | 450 | 120 |
Y | 20 | 400 | 150 |
K | 20 | 400 | 200 |
Adhesive
|
|||||
Strength | Adhesive of Steel cord | Strength | Adhesive of steel cord | ||
Before aging | After aging | Before aging | After aging | ||
ST630 | 60 | 55 | ST3150 | 140 | 130 |
ST800 | 70 | 65 | ST3500 | 145 | 140 |
ST1000 | 80 | 75 | ST4000 | 150 | 145 |
ST1250 | 95 | 90 | ST4500 | 165 | 160 |
ST1600 | 105 | 95 | ST5000 | 175 | 170 |
ST2000 | 105 | 95 | ST5400 | 180 | 175 |
ST2500 | 130 | 120 |
Fire resistant Steel Cord Conveyor Belt for Coal mine(MT 668 /EN14973) | |||
Standard | Tensile strength ≥Mpa |
Elongation at break ≥% |
Abrasion ≤mm3 |
MT668-2019 standard cover rubber | 15 | 350 | 200 |
High strength cover rubber | 17 | 350 | 170 |
High strength abrasion cover rubber | 20 | 450 | 130 |
Standard Specifications | |||||||
Strength grade | Tensile strength (Min.) | Carcass thickness | Carcass weight | Cover grade and recommended thickness(mm) | Belt width | ||
Warp | Weft | mm | Kg/m2 | PVC | PVG | (mm) | |
680s/Grade4 | 680 | 265 | 6 | 8 | 1.0+1.0 | 1.5+1.5 | 500~1600 |
800s/Grade5 | 800 | 280 | 6.5 | 8.5 | 1.0+1.0 | 1.5+1.5 | |
1000s/Grade6 | 1000 | 300 | 7.5 | 10 | 1.0+1.0 | 1.5+1.5 | |
1250s/Grade7 | 1250 | 350 | 9 | 12 | 1.5+1.5 | 2.0+1.5 | |
1400s/Grade8 | 1400 | 350 | 9.5 | 12.5 | 2.0+1.5 | 2.5+1.5 | |
1600s/Grade9 | 1600 | 400 | 10.5 | 14 | 2.0+2.0 | 2.5+1.5 | |
1800s/Grade10 | 1800 | 400 | 11.5 | 15 | 2.0+2.0 | 3.0+2.0 | |
2000s/Grade11 | 2000 | 400 | 12.5 | 16.5 | 2.0+2.0 | 3.0+2.0 | |
2240s/Grade12 | 2240 | 450 | 13.5 | 18 | 3.0+2.0 | 3.0+2.0 | |
2500s/Grade13 | 2500 | 450 | 14.5 | 19.5 | 3.0+2.0 | 3.0+3.0 | |
2800s/Grade14 | 2800 | 450 | 16.5 | 21.5 | 3.0+3.0 | 5.0+3.0 | |
3100s/Grade15 | 3100 | 450 | 18.0 | 24.0 | Selection based on conveyor systems | ||
3400s/Grade16 | 3400 | 450 | 20.0 | 26.0 |
Cover Properties | |||||||
Item | GB20021 Standard | ZHENXING Standard | |||||
T1 | T2 | T3 | T4 | DAHR150 | DAHR180 | ||
Test temperature | |||||||
≤100ºC | ≤125ºC | ≤150ºC | ≤175*ºC | ≤150*ºC | ≤180ºC | ||
Permitted change range | |||||||
Hardness | Difference before and after aging | +20 | +20 | ±20 | ±20 | ±10 | ±10 |
Maximum after aging | 85 | 85 | 85 | 85 | 75 | 75 | |
Tensile strength |
Change rate of property % | 25 | 30 | 40 | 40 | ±15 | ±25 |
Minimum value after aging | 12 | 10 | 5 | 5 | 10 | 8 | |
Elongation at break |
Change rate after aging % | 50 | 50 | 55 | 55 | ±15 | ±15 |
Minimum value after aging | 200 | 200 | 180 | 180 | 400 | 350 |
Cover Grades | |||
Grade | Tensile strength min. (ISO37) Mpa |
Elongation at break min. (ISO37) % |
Abrasion resistance max. (1S04649) mm |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
L | 15 | 350 | 200 |
Tensile cold-resistant coefficient C1(-45ºC) | ≥0.3 | ||
Tensile cold-resistant coefficient C2(-50ºC) | ≥0.2 | ||
Note:C1-working temperature-45ºC~60ºC;C2-working temperature-60ºC~60ºC |
Cover Grades | |||
Type | Rubber material | Permissible temperature ºC | Application areas |
COR | NBR/BR | 35~70 | Conveying products containing animal and vegetable oil and fat in cold areas |
MOR | NBR/SBR | -20~70 | Most products containing animal and vegetable oil and fat |
OR | NBR | 20~70 | Products containing mineral oil |
HOR | NBR | 20~120 | Hot asphalt |
Technical indexes | |||||||
Project | Tensile strength /Mpa |
Elongation at break% |
Wear volume/mm³ |
Hardness/Ao |
Ozone aging | ||
Cover gum | physical property | Before aging | ≥14.0 | ≥400 | ≥250 | 55-70 | No crack |
After aging | ≥12.0 | ≥340 | -- | 60-75 | -- | ||
Acid and alkali resistance |
Category | Soaking solution | Concentration | Soaking condition | Performance change rate before and after soaking | ||
Volume Expansion Rate | Tensile Strength Change Rate | ||||||
A1 | hydrochloric acid | 18% | 50ºC×96h 50ºC×96 |
+10%Following +10% |
-10%within -10% |
||
A2 | sulphuric acid | 50% | 50ºC×96h 50ºC×96 |
+10%Following +10% |
-10%within -10% |
||
A3 | sodium hydroxide | 48% | 50ºC×96h 50ºC×96 |
+10%Following +10% |
-10%within -10% |
||
Test conditions:Ozone concentration(50±5)*10(volume fraction),temperature(40±2)ºC,elongation(20±2)%,time15h |
Technical indexes | |||||
Tensile strength(Map) | Elongation(≥%) |
Abrasion(≥mm3) |
Adhesive strenghth between plies(N/mm) |
Adhesive strength between plyand cover(N/mm) |
|
Top cover (>1.5mm) |
Bottom cover (0.8-1.5mm) |
||||
10 | 400 | 350 | ≥5 | 4.5 | 3.5 |
12 | 400 | 300 | |||
15 | 450 | 250 | |||
17 | 450 | 250 |
Standard Specifications | |||||
Base belt width | Sidewall height | Cleat height | Sidewall width | Effective belt width | Free edge |
300 | 40 | 35 | 25 | 180 | 35 |
60 | 55 | 50 | 120 | 40 | |
80 | 75 | ||||
400 | 60 | 55 | 50 | 180 | 60 |
80 | 75 | ||||
100 | 90 | ||||
500 | 80 | 75 | 50 | 250 | 75 |
100 | 90 | ||||
120 | 110 | ||||
650 | 100 | 90 | 50 | 350 | 100 |
120 | 110 | ||||
800 | 160 | 140 | 75 | 300 | 120 |
120 | 110 | 50 | 460 | ||
160 | 140 | 75 | 410 | ||
200 | 180 | ||||
1000 | 160 | 140 | 75 | 560 | 150 |
200 | 180 | ||||
240 | 220 | ||||
1200 | 150 | 140 | 75 | 690 | 180 |
200 | 180 | ||||
240 | 220 | ||||
300 | 260 | 105 | 630 | ||
1400 | 200 | 180 | 75 | 830 | 210 |
240 | 220 | ||||
300 | 260 | 105 | 770 | ||
400 | 360 | ||||
1600 | 200 | 180 | 75 | 970 | 240 |
240 | 220 | ||||
300 | 260 | 105 | 910 | ||
400 | 360 | ||||
1800 | 240 | 220 | 75 | 1110 | 270 |
300 | 260 | 105 | 1050 | ||
400 | 360 | ||||
500 | 460 | 125 | 1010 |