| Type: | Rubber Conveyor Belt |
|---|---|
| Material: | Rubber |
| Inside Material: | Steel |
| Samples: |
Heat-Resistant, Wear-Resistant,Abrasion
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | ZHENXING STEEL CORD CONVEYOR BELT | ||||||||
Scope of Applications
Tensile strength of conveyor belts:500N/MM-7000N/MM
1)Max width of conveyor belts:2350mm
Applications
Long-distance transportation ,high speed,high carrying capacity,high tensile strength.
Features
1)High tension,it's tension is three times as large as that of NN/EP rubber conveyor belt.
2)Short take-up travel for small elongation.
Application
In various fields: coal, mining, ports, metallurgy, electric power, chemical industry, etc., conveyor belts can transport large amounts of materials over long distances and high speeds.
Adhesive
| Strength | Wire Rope Adhesive | Strength | Wire Rope Adhesive | ||
| Before Aging | After Aging | Before Aging | After Aging | ||
| ST630 | 60 | 55 | ST3150 | 140 | 130 |
| ST800 | 70 | 65 | ST3500 | 145 | 140 |
| ST1000 | 80 | 75 | ST4000 | 150 | 145 |
| ST1250 | 95 | 90 | ST4500 | 165 | 160 |
| ST1600 | 105 | 95 | ST5000 | 175 | 170 |
| ST2000 | 105 | 95 | ST5400 | 180 | 175 |
| ST2500 | 130 | 120 | - | - | - |
Minimum Pulley Diameter
| Project | ST630 | ST800 | ST1000 | ST1250 | ST1600 | ST2000 | ST2500 | ST3150 | ST3500 | ST4000 | ST4500 | ST5000 | ST5400 |
| Minimum Pulley Diameter(Mm) | 500 | 500 | 630 | 800 | 1000 | 1000 | 1250 | 1400 | 1600 | 1600 | 1600 | 1800 | 1800 |
Technical Index
Strength: 630N/mm-6000N/mm
Width (mm): 400mm-2500mm
| Project | ST630 | ST800 | ST1000 | ST1250 | ST1600 | ST2000 | ST2500 | ST3150 | ST3500 | ST4000 | ST4500 | ........ |
| Tensile Strength(N/Mm) | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 3500 | 4000 | 4500 | ........ |
| Diameter(Mm) | 3 | 3.5 | 4.0 | 4.5 | 5.0 | 6.0 | 7.2 | 8.1 | 8.6 | 8.9 | 9.7 | ........ |
| Highest Point(Mm) | 10±1.5 | 10±1.5 | 12±1.5 | 12±1.5 | 12±1.5 | 12±1.5 | 15±1.5 | 15±1.5 | 15±1.5 | 15±1.5 | 16±1.5 | ........ |
| Cover Thickness (Mm) | 5 | 5 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | ........ |
| Cover Thickness (Mm) | 5 | 5 | 6 | 6 | 6 | 8 | 8 | 8 | 8 | 8 | 8 | ........ |
| Width (Mm) | Wire Rope Core Number | |||||||||||
| ST630 | ST800 | ST1000 | ST1250 | ST1600 | ST2000 | ST2500 | ST3150 | ST3500 | ST4000 | ST4500 | ........ | |
| 800 | 75 | 75 | 63 | 63 | 63 | 63 | 50 | 50 | 50 | ........ | ||
| 1000 | 95 | 95 | 79 | 79 | 79 | 79 | 64 | 64 | 64 | 64 | 59 | ........ |
| 1200 | 113 | 113 | 94 | 94 | 94 | 94 | 76 | 76 | 77 | 77 | 71 | ........ |
| 1400 | 133 | 133 | 111 | 111 | 111 | 111 | 89 | 89 | 90 | 90 | 84 | ........ |
| 1600 | 151 | 151 | 126 | 126 | 126 | 126 | 101 | 101 | 104 | 104 | 96 | ........ |
| 1800 | 171 | 143 | 143 | 143 | 143 | 114 | 114 | 117 | 117 | 109 | ........ | |
| 2000 | 159 | 159 | 159 | 159 | 128 | 128 | 130 | 130 | 121 | ........ | ||
| 2200 | 176 | 141 | 141 | 144 | 144 | 134 | ........ | |||||
| 2400 | 193 | 155 | 155 | 157 | 157 | 146 | ........ | |||||
Note:
1. After communication, the thickness of the coating, the diameter of the wire rope and the distance between the wire ropes can be customized according to customer requirements.
2. The conveyor belt can be produced under the standards of German DIN22131, Australia AS133, Japan JSK6369, etc. according to customer requirements.
| FACTORY AND INSPECTION |
| MAY BE YOU NEED |
Cement is one of the most commonly used materials in construction. Today, global cement demand is growing at a rate of 4.5% per year and is expected to approach 5.5 billion tons this year. To meet the global demand for cement for residential and commercial construction and urbanization, Huayue supplies high-strength, flame-retardant steel cord core conveyor belts and fabric conveyor belts to cement plants worldwide. Our products ensure safe and efficient transportation in the cement production process. Our range of products ensures safe and efficient transportation in the cement production process.
The whole cement manufacturing process from the quarry to the material crushing and processing to the cement plant is more complex. Moreover, the raw materials are highly abrasive and processed at high temperatures, so different processes require different cement conveyor belts.
Raw material extraction/quarrying
The limestone, clay or marl blasted at the quarry is dumped into the primary crusher by dump truck.
Material from the quarry enters the jaw crusher for coarse crushing up to approximately 6 inches (150 mm) in size. The crushed material falls onto a belt or series of belts and is conveyed to stockpile.
The crushed limestone is still relatively large and sharp, so the conveyor belt is subjected to the impact and abrasion of the falling limestone. To ensure safe operation of the cement conveyor belt system, we recommend the use of impact resistant conveyor belts (with a multi-layer fabric carcass and steel crusher).
Due to the characteristics of the cement industry, the distance from the quarry to the cement plant is relatively long. The crushed limestone is usually transported to the cement plant by conveyor belt, so the conveyor belt must cover a long distance. We recommend the use of wire rope conveyor belts.
After primary crushing, the limestone is secondarily crushed to sizes less than 6 inches (150 mm) until it is crushed to less than 1 inch (25 mm) for storage and batching.
The crushed limestone and other raw materials (such as sand, clay, fly ash and shale) are conveyed to the raw material storage area and then mixed in the required proportions.
The most common method of manufacturing cement is through a dry process.
The mixed material is dried and fed to a mill (vertical mill/ball mill) and crushed into a fine powder. It is recommended to use a wear resistant rubber conveyor belt to transport the material.
During the above mentioned stages of material handling, the conveyor belt cover can often clump together. Due to the high cost of cleaning procurement, installation and maintenance of belt sweeping systems or scrapers, the use of anti-stick conveyor belts is recommended. Its unique anti-adhesive coating prevents cement auxiliary materials from standing on the belt.
High temperature processing steps include preheating the tower and kiln, heating the crushed raw material and sintering the mature material.
Fuels for cement calcination include coal and petroleum coke. A refractory and oil resistant conveyor belt should be used for transporting the fuels.
The temperature of the clinker entering the clinker cooler drops rapidly. After cooling the clinker enters the clinker storage via belt conveyor. However, the temperature of the cooled clinker reaches up to 200 degrees Celsius and the high temperature accelerates the aging of ordinary belts.
Huayue heat resistant conveyor belt is very suitable for conveying hot clinker. Its rubber cover is extremely heat resistant and can withstand peak temperatures of up to 220°C, thus protecting the belt carcass and extending its service life.
Cement grinding is the final process in cement manufacturing. The powdered cement clinker is ball-ground into a finished cement product.
Packing and loading
Corrugated sidewall belts are an efficient and long-term solution for improving bulk materials in the cement industry during the packaging and loading of finished products. These large angle and vertical belts can be used at the end of the production chain.
For more information about conveyor belts for cement plants or the cement industry, please contact us.
| FAQ |
(1)Q: Are you a factory or trading company?
A: We are a factory with an export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost, this charge will be deducted from the payment for the order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For a small sample shipping costs, you can pay either by PayPal or by T/T. And by T/T or L/C at sight for a large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A, etc?
A: Yes, we can do them for you.
(6)Q: What is your factory's main product?
| No. | Rubber Conveyor Belt |
| 1 | Conveyor Belt for General Purpose |
| 1.1 | EP(polyester) Conveyor Belt: EP100,EP125,EP150,EP200,EP250,EP300,EP400,EP500,EP630 |
| 1.2 | NN(Nylon) Conveyor Belt : NN100,NN125,NN150,NN200,NN250,NN300,NN400,NN500,NN630 |
| 1.3 | Cotton Conveyor Belt: CC-56 CC70 |
| 1.4 | Steel Cord Conveyor Belt: ST630,ST800,ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST4000,ST4500,ST5000, ST5400 |
| 2 | Conveyor Belt for Special Purpose |
| 2.1 | Heat Resistant Conveyor Belt |
| 2.2 | High-Temperature Conveyor Belt |
| 2.3 | Fire Retardant Conveyor Belt |
| 2.4 | Cold Resistant Conveyor Belt |
| 2.5 | Oil Resistant Conveyor Belt |
| 2.6 | Chemical Resistant Conveyor Belt |
| 3 | Chevron (PaConveyor Belt |
| 4 | Bucket Elevator Conveyor Belt |
| 5 | Sidewall Conveyor Belt |
| 6 | Flat Transmission Belt |
| YOU MAY ALSO LIKE |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}