Abrasion 90mm3 Ep Nn Chevron Steel Cord Pipe Sw Solid Woven PVC Pvg Bucket Elevator and Rough Top Conveyor Belt

• Customization: Available
• Type: EP200
• Material: Rubber
• Model NO.: Conveyor Belt
• Inside Material: Polyester
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Type of Belt: Ep/Nn/ Steel Cord/Sold Woven/Sidewall/Rough Top
• Grade of Belt DIN: DIN-Z-15MPa. 18MPa. 20MPa .24MPa
• Grade of Belt Rma: Rma-I 17MPa, Rmaii-14MPa
• Grade of Belt as: As1332-a 17MPa, M24MPa
• Grade of Belt ISO: ISO-H BS490-M24MPa
• Grade of Belt JIS: JIS6332-G 14MPa. D-18MPa
• Grade of Belt SABS: SABS-M
• Grade of En14973: En14973 C1, C2, A1, B1, B2
• Heat Resistant of Belt: T1:100-120/T3:Hr150/T4:Hr180
• Flame Retardant Conveyor Belt: DIN-K, Mt668/Mt914/ISO15326-K
• Transport Package: PP Package/ Iron Shelf/Iron Pallet/Wooden Pallet/W
• Trademark: ZHENXING
• Origin: China
• HS Code: 40101200
• Production Capacity: 200000000sqm/Year
• Package Size: 160.00cm * 100.00cm * 160.00cm
• Package Gross Weight: 5000.000kg

Product Description

FABRIC RUBBER CONVEYOR BELTS

ZHENXING conveyor belts are quality products with an extremely high degree of reliability and are the 
qualified manufacturer of different types of conveyor belts meeting all the requirements in most industrial activities.

Conveyor Belt Construction
 

Top Cover

Designed to protect the carcass from service conditions like oil,heat, abrasion, etc.

Skim Coat

Compounded for excellent adhesion between plies for protecting against ply separation.

Carcass

Extremely low stretch characteristics of fabric and good troughability.

Bottom Cover

Excellent in abrasion and fexibility, provides wearing  surface against pulleys and idlers.

 

 

 

COVER RUBBER THICKNESS
 

Condition              Material            Carried           Lump Size         Belt Cycle         (Second)          0~20         20~60        60~300

Moderately Abrasive

Abrasive

Very Abrasive

Extremely Abrasive

Fine Coal, Grain, Wood Chips, Ash, Cement, etc. 0 ~ 2″ (0~50mm) 1/16 ~ 1/8 (1.5~3.0mm) 1/16 ~ 3/32 (1.5~2.5mm) 1/16 ~ 1/32 (1.5~0.8mm)

Sand, Coal, Clay, Salt, etc.   2″ ~ 6″ (50~150mm) 1/8 ~ 3/16 (3.0~5.0mm) 1/8 ~ 3/16 (3.0~5.0mm) 1/16 ~ 3/32 (1.5~2.5mm)

Limestone, Crushed Stone, Coke, etc.   6″ ~ 10″ (150~250mm) 3/16 ~ 1/4 (5.0~6.0mm) 3/16 ~ 1/4 (5.0~6.0mm) 1/8 ~ 3/16 (3.0~5.0mm)

Ores, Slag, Cullet, etc. 8″~ 12″ (200~300mm) 1/4 ~ 5/16 (6.0~8.0mm) 1/4 ~ 5/16 (6.0~8.0mm) 3/16 ~ 1/4 (5.0~6.0mm)

 

Cover Grade							Tensile Strength Min.(Mpa)												Elongation Min.(%)																	Abrasion Loss Max.(mm³)
DIN - X							25												450																	120
DIN - W							18												400																	90
AS - A							17												400																	70

Note: Abrasion test is based on DIN 53516

POLYESTER FABRIC (EP) CONVEYOR BELT

The combination of polyester in warp and nylon in filling provides technically low-stretch and high impact
abuse resistance.

•    Special Features
 •  High resistance to tension.
 •  Low elongation.
 •  Outstanding stability dimensionally.
 •  Impact resistance.
 •  Complete moisture & mildew protection

General Conveyor Belt

This Construction, utilizing all nylon, offers maximum impact and damage resistance from material and suitable for transporting a variety of materials(ore, crushed stones, grain, sand, etc.). Several types of carcass using NN/EP fabrics with various thickness are available according to the load conditions.

 

Grade																		EP100				EP125					EP150    EP200											EP250				EP300					EP350				EP400					EP500
Min. Tensile Strength										kg/cm-ply      lb/in-ply								100				125					150						200					250				300					350				400					500
																		560				700					850						1,120					1,400				1,680					2,000				2,240					2,800
Working Tension Rating   (Vulcanized)										kg/cm-ply      lb/in-ply								10.0 56.0				12.5 70.0					15.0 84.0						20.0 112.0					25.0 140.0				30.0 168.0					35.0 200.0				40.0 224.0					50.0 280.0
Approx. Gauge per Ply										mm								0.9				1.2					1.4						1.5					1.9				2.0					2.1				2.4					3.2
with skim coat.										inch								0.035				0.047					0.055						0.059					0.075				0.079					0.083				0.094					0.126

 

NYLON FABRIC (NN) CONVEYOR BELT

Special Features
 •  Exceptionally shock & impact resistance to the carrying surface.
 •  Superior in fastener holding ability.
 •  Excellent troughability and flexibility
 •  Smaller pulley available.
 •  Greatest resistance to water and mildew.

Grade																		NN100				NN120					NN150						NN200					NN250				NN300					NN350				NN400					NN500
Min. Tensile Strength										kg/cm-ply      lb/in-ply								100				120					150						200					250				300					350				400					500
																		560				672					840						1,120					1,400				1,680					1,960				2,240					2,800
Working Tension Rating   (Vulcanized)										kg/cm-ply      lb/in-ply								8.4 46.7				10.0 56.0					12.5 70.0						16.7 93.3					20.8 116.7				25.0 140.0					29.2 163.3				33.3 186.7					41.7 233.3
Approx. Gauge per Ply										mm								0.9				1.2					1.3						1.5					1.6				1.8					2.0				2.2					2.7
with skim coat.										inch								0.035				0.047					0.051						0.059					0.063				0.071					0.079				0.087					0.106

Grade		160				200				250					315			400					500						630						800						1000				1250					1600						2000
2ply 3ply 4ply 5ply 6ply		160/2				200/2				250/2    250/3					315/2    315/3			400/2 400/3 400/4					500/3 500/4 500/5						630/3 630/4 630/5 630/6						800/3    800/4    800/5    800/6						1000/3    1000/4    1000/5    1000/6				1250/3    1250/4    1250/5    1250/6					1600/4    1600/5    1600/6						2000/5 2000/6

Flame Resistant Conveyor Belt

Lorbrand Flame resistant conveyor belt is designed for the best
service conditions of coal mining industries. It is suitable for mining,
power plant, electric utilities, coal cleaning plants. The different
rubber compounds are available in accordance with its requirement.

 

1.FR-MOR

Grade is fire resistance with medium oil resistance and accepted by USMSHA(Mine Safety and Health Administration).
It is recommended for the typical applications like oil treated coal and grain industries requiring fire & oil resistance, and static conductivity with lower electric resistance than 1MΩ .
 

2.FR-SBR

Grade is SBR fire resistant cover rubber meeting USMSHA (Mine Safety and Health Administration). It provides highly resistanceto wear and cold resistance.

3.FR-GR
Grade is specially compounded SBR cover
rubber for the under-ground operation
requiring fire resistance, static conductivity.
The important characteristic is self
extinguishable cover rubber.

•    Flame Resistant

Cover Rubber Grade: USMSHA, SABS, DIN, AS, etc.




 

Type							Cover Rubber
							Application Grade											Min. Tensile   kg/cm²   psi									Min. Elongation (%)
FR-MOR							MSHA/MOR(USA)											150					2100					400
FR-SBR							MSHA/SBR(USA)											140					2000					400
FR-GR							ISO, DIN, JIS, KS											140					2000					400

Certiied  USA      • FR-MOR(MSHA/MOR/SC) USMSHA No. 28-85/6
                          • FR-SBR(MSHA/SBR) USMSHA No. 28-85/5
             
RUSSIA • FR-MOR POCC KR BO1408
                          • FR-SBR POCC KR BO1324

Heat Resistant Conveyor Belt

The performance-proved Lorbrand Belt : Heat resistant belt meets hot service application like hot sintered ore, hot pellet, hot clinker, hot chemical, fertilizer, hot cement.

 

SPECIAL FEATURES

•  Excellent heat resistant and abrasion resistant cover rubber compound.

 •  Recommended to protect belt from surface cracking and hardening by heat.

 •  Specially heat-treated and dipped fabric to minimize carcass shrinkage by heat
aging.

HT-710 & SUPER-HT Exwill conveyor belt are the best selection for wide ranges of high temperature application.

Heat resistant conveyor belts are most suitable for heat resistant applications where the temperature of material to be carried is over 60°C(140°F).

 

Temperature

Type

Compound    of Cover     Rubber

Temperature Range of Use

Application

Belt Surface Temp

Average Material Temp

Max.°F

Max.°C

Max.°F

Max.°C

Medium   Temperature         High   Temperature         High   Temperature Extremely High   Temperature

HT-400 (HR-100) ECO-HT HT-710 (HR-150) SUPER-HT (HR-200)

SBR    EPM/SBR        EPM        EPM

210°F   270°F  (300°F)    Max.   300°F    Max.   400°F

100°C 130°C (150°C) 150°C 200°C

Lump 300°F Fines 250°F Lump 550(650)°F Fines 300(400)°F Lump 650°F Fines 100°F Lump 750°F Fines 480°F

Lump 150°C Fines 120°C Lump 300(350)°C Fines 150(200)°C Lump 350°C Fines 200°C Lump 400°C Fines 250°C

For low temperature with abrasive material.   (coke, sintered products, etc.)    For higher temperature use with lower temperature   condition on bottom cover than HT-710   Top cover: EPM, Bottom cover: SBR   - Economical version of HT-710   (dried clay, cement clinker, etc.)    For higher temperature use.   (dried clay, cement clinker, etc.)    For extremely high temperature application.   (sintered ore, cement clinker, chemicals, etc.)

Materials Carried

Lump Size

Temperature of Material Carried

Belt Surface Temperature

Sintered Ore      Return of Sintered Ore                   Coke             Raw Material                  Clinker                 Cement             Metal Powder             Molding Sand

25~200 mm(1~8 inch)   10 mm(0.4 inch) downward     100~200 mm(4~8 inch) 30 mm(1.2 inch) downward     10~30mm(0.4~1.2 inch)                Powder                     -                     -

200~400°C(390~750°F)            260°C(480°F)      70~100°C(160~210°F)     180~220°C(360~410°F)     100~220°C(210~410°F)     100~125°C(210~250°F)            170°C(340°F)     200~250°C(390~480°F)

130~150°C(270~300°F)     150~190°C(300~370°F)      50~60°C(120~140°F)     100~120°C(210~250°F)     100~110°C(210~230°F)      80~90°C(170~190°F)     120~130°C(250~270°F)      80~90°C(170~190°F)

HEAT RESISTANT CONVEYOR BELT (CTND)

USER OF ATTENTION

The temperature of material being transported and the belt's surface temperature vary according to the material and shape. For instance, when materials have a temperature of 150ºC(300ºF) (such as coke or sintered ore) and have a relatively small contact area, Lorbrand conveyor belt's surface temperature could remain at 60~80ºC(140~180ºF). In contrast, when powdered material like cement is being conveyed, the material temperature and the belt surface temperature do not differ so greatly. The lifetime of heat resistant belt is largely affected by the belt's surface temperature during operation.

CHARACTERISTICS INDISPENSABLY REQUIRED FOR HEAT RESISTANT LORBRAND

CONVEYOR BELT ARE AS FOLLOWS:

 •  Rubber cover and carcass should not deteriorate due to heat.
 •  Rubber cover and carcass should maintain excellent properties, even at high temperatures and good adhesion to form one unit, even when they are exposed to high temperatures.

The surface temperature of heat resistant Lorbrand conveyor belt varies with the material type, belt speed,loading rate and size depending on circumstance condition. In order to select the proper heat resistant Lorbrand conveyor belt, it is necessary to consider not only the material temperature to be conveyed but also the surface temperature of Lorbrand conveyor belt.

 

Materials     Carried

Temperature of Materials Carried

Belt Surface Temperature

Heat Resistant Conveyor Belt Grade

200°C downward                  50~100°C

HT-400

Sintered Ore

100°C downward (Lump Condition)   200°C upward                   100~130°C                                                                  130~180°C

HT-400

HT-550 (Lump Condition)             HT-710       HT-710, HT-850

Return of Sintered Ore

150°C downward   150°C upward

50~80°C   80°C downward (Lump Condition)                 80~130°C                130~180°C

HT-400 HT-400 HT-550 HT-710, HT-850

Spherical Ore

120°C upward                80°C downward

HT-400

120°C downward                80°C upward

HT-550

Pellet

150°C downward 200°C downward

100°C downward

HT-400 (Lump Condition)

Coke

60~400°C                  100°C downward

HT-400

120°C downward                   50~80°C

HT-400 (Lump Condition)

Cement

120°C upward

80~130°C 130~180°C

HT-550

HT-710 HT-710, HT-850

Dried Lime   Dried Clay

120~150°C 200°C downward

100°C upward 50~100°C

HT-400 (Lump Condition)

HT-550 (Lump Condition)             HT-400

500°C upward

100~130°C 130~180°C

HT-550

HT-710, HT-850

Cement Steel Mill Chemical    Fertilizers

80°C downward                    50~70°C

HT-400

80°C upward                    120~180°C

HT-550 HT-710, HT-850

120°C downward                  50~100°C

HT-400

Molding

120°C upward                                        120~180°C

HT-550

HT-710 HT-710, HT-850

 

RESTRICTIONS ON THE USE OF  HEAT-RESISTANT BELT

•    SBR Heat-resistant belt

Do not use SBR heat resistant belt when :

 •  Powdered material is over 70ºC(160ºF)
 •  Strong acid or alkaline is used
 •  Oil products and oil-staine  substances are used.
 •  The operation site or the materials require flame-resistant belts.


•    EPR(EPM) Heat-resistant belt

Do not use EPR(EPM) heat-resistant belts when :

 •  Powdered material is over 180ºC(350ºF)
 •  Oil products and oil-stain other than vegetable oil are present.
 •  The location of the materials requires flame-resistant belts.

 

Oil/Heat & Oil Resistant Conveyor Belt

The cover rubber is especially compounded for the applications requiring resistance to oils. It has outstanding abrasion, ozone and weather resistance. This Lorbrand conveyor belt is recommended for the conveyor lines causing swelling and sponginess by oils.

OR-100

Grade is to resist Moderate Oil Resistant operations like wood chips, linseed, cottonseed and whole soybeans where static conductivity is needed.

OR-200

Grade has superior oil resistance to various kinds of animal and vegetable oil with severe cold temperature up to -45ºC (50ºF)

OR-300

Grade has excellent resistance to the toughest oil application such as oil-treated coal, petroleum based oils.

Type

Min. Tensile Strength kg/cm²      psi

Min.    Elongation         (%)

Volume Change(%) ASTM #3 Oil

Use

OR-100

100        1400

Min. 350

Max. 150

Wood chip, linseed, cottonseed, kernel corn, and whole     soybeans, static conductivity, and moderate oil resistance.

OR-200

120        1700

Min. 350

Max. 90

Oil-treated materials and for carrying oily metal turnings and     shavings, crushed soybeans, animal or vegetable fats.

OR-300

120        1700

Min. 400

Max. 20

Oily metal parts, crushed soybeans, automatic hydrocarbons     such as benzol, toluene and petroleum based oils.

HTN/HOT

120        1700

Min. 400

Max. 60

Hot asphalt and other oil& heat resistant applications.

Oil resistance (volume change) and immersion condition: 70°C × 96 Hrs.
 

Incline (Chevron Cleated) Conveyor Belt------Support custom (Chevron )pattern mold.

Lorbrand Incline (Chevron-Cleated) conveyor belt is used to carry sand, fine coal and grain materials by using steep inclines. Chevron Cleats increase the quantity of granular materials in Fabric incline applications.

SPECIAL FEATURES

•  High quality fabric with low stretch.

•  Cleat angle and pitch are designed for smooth travel over return idlers.

•  Higher angle of 17~30 degree of incline.

•  Wear resistant and oil resistant black rubber quality is available.
 

 

 

Sidewall Conveyor Belt

This Lorbrand belt is designed with two corrugated sidewalls molded to crossrigid basebelt. It is developed in order to meet larger capacities with more steep inclined line.

 

 

 STEEL CORD RUBBER CONVEYOR BELT

Lorbrand Steel Cord Rubber Conveyor Belt can be widely used in the coal industry, mines,ports, power
plants and chemical industry for conveying materials..

Performance Of Conveyor Belts
 S

Solid Woven Conveyor Belt
 

PVG fabric whole core flame retardant conveyor belt is designed and produced according to MT914-2019 standard. The product quality of enterprises that have passed IS09001 quality system certification has reached

the international advanced level. This product is made of solid weven cavcass with chemical fiber and cotton as the skeleton, impregnated with paste, pasted with rubber covering and vulcanized.

Solid Woven Conveyor Belt:




 

Tensile strength/MPa	Elongation at break%	Abrasion/mm
≥10.0	350%	≤200

A. Surface resistance value: ≤ 3 × 108Ω
 

B. Drum Friction performance : the surface temperature of the drum is ≤ 325 ºC, and there is no flame

combustion or flameless combustion.
 

C. Combustion performance of alcohol blowtorch:
 

Test piece with covering layer: average value ≤ 3.0 S, single value ≤ 10.0 S

Test piece without of covering layer: average value ≤ 5.0 S, single value ≤ 15.0 S
 

D. Tunnel propane combustion performance: retention length of undamaged lenght > 600mm

Fensile strength	Minimum wap strength          N/mm	Minimum weft strength         N/mm	Minimum tear force N	Minimum elongation at break in warp direction	Min elongation at break in weft direction at break
680	680	265	1090	15	18
800	800	280	1180	15	18
1000	1000	300	1180	15	18
1250	1250	350	1540	15	18
1400	1400	350	1540	15	18
1600	1600	400		15	18
2000	680	400		15	18

Rough Top Conveyor Belt

Rough Top Conveyor Belt can be used for tilt angleLight materials such as bags, boxes and parcels are transported at 35 degrees angle. The top rubber surface is wear-resistant and skid-resistant rubber. It has the functions of cushioning, shock absorption and stabilization for material transportation, especially anti-skid.
 

Pipe Conveyor Belt

Lorbrand pipe conveyor belt is designed to be suitable for the resistance to flex fatigue and abrasion by materials to be carried with superior ply adhesion.

 

Pipe Diameter (mm, ø)							Cross Section Area (75%)									Belt Speed (m/min)							Capacity     (m³/hr)							Material    Size    (mm)							Comparison with Standard C/Belt(mm)
150							0.013									120							95							30~50							300~500
200							0.023									130							180							50~70							500~600
250							0.041									140							344							70~90							600~750
300							0.049									145							441							90~100							750~900
350							0.066									175							693							100~120							900~1,050
400							0.108									200							1,296							120~150							1,050~1,200
500							0.155									225							2,093							150~200							1,200~1,500
600							0.216									250							3,240							200~250							1,500~1,800
700							0.290									275							4,620							250~300							1,800~2,000
850							0.404									300							7,272							300~400							2,000~2,200

 

SPECIAL FEATURES
 

• Closed transportation in order to prevent materials from overflowing, drop-down, scattering and mixing with foreign materials from outside.
 

• This Lorbrand pipe conveyor belt is economical for curve (45°~90°) and incline(up to 30°) transportation due to easy design of conveyor line and limited space.

 

Application