EP Conveyor Belt
Specifications
Detailed Product Description
1.plies:1-10ply
2:width:100-3000mm
3.thickness:3-50mm
4.Tensile Strength: 9-25MPA
5.quality control:ISO9001:2008
6. high-performance characteristic:resistance to abrasion
Usage:
used for transferring nubbly, grainy, and farinose things at a high speed in a middle and long distance with higher load.
Variety:
according to the performance of covered-colloid products can be classified into designated crack-resistant, designated wear-resistant, general, and resistance to acid-base, and anti-burning.
Features:
polyester conveyor belt used by the multi-layer polyester (or to the polyester, polyester weft for amine) bond canvas with a certain way, up and down the high-strength plastic cover, good wear-resistant flexible rubber.
Structure:
It uses polyester canvas as carcass, its structure is the same as General Conveyor Belt.
Standards:
GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc.
types:
Besides General EP Belt, there are Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, High-grade type and etc.
Models:
Ep80 Ep100 Ep125 Ep200 Ep250 Ep300 Ep400 Ep500 Ep600
The physical and mechanical properties of nylon conveyer belt and EP conveyer belt are as following:
1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt.
2. Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value:
315 400 500 600 630 8OO 9OO 1000N/mm
b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.
c. Straightness: no more than 25mm
Few Chinese Supplier Can Arrive Above Requirement!
1. Professional technical support and research and development
Relying on a provincial technical center, national accredited laboratory, post-doctoral workstation, Thailand natural rubber garden, and other supporting advantages, the company has established a sound research and development system and quality assurance
mechanism.
We has 36 middle and senior technical personnel, advanced detection means, complete experimental equipment, strong research, and development ability. In order to monitor product quality, the company has set up five rubber material laboratories, with drum
friction, conductive static electricity, vulcanization instrument, coke
testing machine, ozone instrument and other experimental equipment,to ensure the inspection and quality control of the whole production process from raw material purchase, small sample, in-process sampling inspection, finished product storage
inspection.
2. Advantage of advanced production equipment
We uses advanced production equipment for each production process. In terms of rubber mixing, it has 8 sets of internal mixer, such as F370 internal mixer and F270 internal mixer.
3. Fine quality management model create quality products
In addition to the production according to the relevant national standards, according to the different technical requirements of foreign users, we can also refer to the German DIN standard, British BS3289 standard, Japan JIS standard, the United States RMA standard organization production. All kinds of product conveyor belts produced by our company are suitable for conveying operation with high strength and large load long distance in the underground coal mine, and their safety performance meets or exceeds the requirements of British BS3289 standard.
We have strict product process and it is visual! Welcome to visit us and give us your advice!
Rubber Mix Process Calender Process Forming Process
Vulcanizing Process Surface Inspection Process Packaging
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Rubber Cover Property (DIN22102)
| Item |
Unit |
Rubber Grade |
| W |
X |
Y |
Z |
H |
D |
L |
| Tensile Strength≥ |
Mpa |
18 |
25 |
18 |
15 |
24 |
18 |
15 |
| Elongation at Break≥ |
% |
400 |
450 |
400 |
350 |
450 |
400 |
350 |
| Abrasion≤ |
mm3 |
90 |
120 |
150 |
250 |
120 |
100 |
200 |
Adhesion between Layers (DIN22102)
| Item |
Adhesion between Fabrics(N/mm) |
Adhesion between Rubber and Fabric(N/mm) |
| Cover≤1.5mm |
Cover>1.5mm |
| EP/NN |
Max. ≤(N/mm) |
20 |
20 |
20 |
| Average ≥ (N/mm) |
5 |
3.5 |
4.5 |
| Min. ≥ (N/mm) |
4 |
2.5 |
3.5 |
| CC ≥ (N/mm) |
2.7 |
2.4 |
2.7 |
Q1: What types of Conveyor B elt you can Produce?
A: Hello,Dear We can produce Sidewall,Flat,Chevron,Steel Cord Conveyor Belt,Heat Resistant,
Oil Resistant,Acid-Alkali Resistant Cold Resistant and PIPE Conveyor Belt etc.
Q2:Does your Company have ISO Certificate?
A: Yes of course we have ISO9001:2008 Certificate.
Q3:Can you Provide FORM E Certificate of Origin for us?
A: Yes we can do Normal CO,FROM E,FROM F,FORM A etc.
Q4:What is your Delivery Time?
A:Normally Within 10-20days after getting your Prepayment or L/C.
Q5:Can you give Guarantee if I buy your belt?
A:Of course,we must give Guarantee for all of our Products,Please tell me your Details of Requirement.
We will be appreciated if you can provide the following specification:
1. Conveyor belt type
2. Top cover thickness
3. Bottom cover thickness
4. No.of plies
5. Width of the conveyor belt
6. Grade:
If you are not sure for any of above,we can recommend for you.
Once we get above information we will quote exact price at soonest time.
Audited Supplier 
){kind=link}
){kind=link}