| Type: | EP200 |
|---|---|
| Material: | Rubber |
| Inside Material: | Polyester |
| Description | Unit | Specified data | Proposal Data | Test Method | |
| 1 | Dimension | ||||
| 1.1 | Belt Tensile Strength | KN/m | Min. 1600 | Min. 1600 | DIN22131 |
| 1.2 | Belt Length per reel | m. | 300- | 300 | |
| 1.3 | Belt Width | mm. | 1600 + /-12 | 1600 + /-12 | DIN22131 |
| 1.4 | Rubber grade | DIN -20mpa | DIN -20Mpa | DIN22131 | |
| 1.5 | Edge Distance | mm. | Min20 | Min20 | DIN22131 |
| 1.6 | Top Cover Thickness | mm. | 6.0+1.0/-0 | 5.0+1.0/-0 | DIN22131 |
| 1.7 | Bottom Cover Thickness | mm. | 6.0+1.0/-0 | 5.0+1.0/-0 | DIN22131 |
| 1.8 | Core rubber thickness over steel cord | mm. | 1.0±0.02 | 1.0±0.02 | DIN22131 |
| 1.9 | Dislocation of cord vertical | mm | ±1.0 | ±1.0 | DIN22131 |
| 1.10 | Total belt Thickness | mm. | 17.+2free/-0 | 17+2free/-0 | DIN22131 |
| 1.11 | Weigth of belt (Nominal) | Kg/m | Approx.30 | Approx. 32 | |
| 2 | COVER RUBBER | ||||
| 2.1 | Specific weight | g/cm³ | 1.15±0.05 | 1.15±0.05 | DIN53550 |
| 2.2 | Tensile Strength | N/mm2 | Min 21.12 | Min 21.12 | DIN53504 |
| 2.3 | Ultimate elongation | % | ! | `Q | DIN53504 |
| 2.4 | Tensile Strength after aging at 70ºC for 7 days | N/mm2 | Min. 12 | Min. 12 | DIN53508 |
| 2.5 | Ultimate elongation after aging at 70ºC for 7 days | % | Min.250 | Min 250 | DIN53508 |
| 2.6 | Abrasion Resistance | mm3 | Max 150 | Max 150 | DIN53516 |
| 2.7 | Tearing Strength | N/mm | 20 | Min.20 | DIN53507 |
| 2.8 | Ozone Resistance at 96 HRS x 50 pphm | No Crack | No Crack | DIN53509 or ISO 1431 | |
| 2.9 | Hardness | Shore-A | 60± 5 | 60 ± 5 | DIN53505 |
| 3 | Steel Cord | ||||
| 3.1 | Cord Design | - | Open Type | Open Type | |
| 3.2 | Cord Construction | - | 7x7 | 7x7 | |
| 3.3 | Cord Diameter | mm | 5.0 | 5.1 | DIN22131 |
| 3.4 | Cord Pitch | mm. | 12± 1.5 | 12 ± 1.5 | DIN22131 |
| 3.5 | Number of Cord | - | 126 | 126 | |
| 3.6 | Type of coating | - | Zinc | Zinc-hot dip | DIN22131 |
| 3.7 | Cord Breaking Load | KN. | Min. 9.0 | DIN22131 | |
| 4 | SEPARATION STRENGTH | ||||
| 4.1 | Adhesion between covers/core rubber | N/mm. | Min 12 | Min 12 | DIN22131 |
| 4.2 | Cord Pull-out Force before aging | N/mm. | Min. 105 | Min. 105 | DIN22131 |
| 4.3 | Cord Pull-out Force After aging at 145ºC for 150 min | N/mm. | Min.95 | Min. 95 | DIN22131 |
| 4.4 | TROUGHABILITY(@45ºC troughed idlers | Min 0.18 | Min 0.18 | ISO 703 |
A: Hello,Dear We can produce Sidewall,Flat,Chevron,Steel Cord Conveyor Belt,Heat Resistant,
Oil Resistant,Acid-Alkali Resistant Cold Resistant and PIPE Conveyor Belt etc.
Q2:Does your Company have ISO Certificate?
A: Yes of course we have ISO9001:2008 Certificate.
Q3:Can you Provide FORM E Certificate of Origin for us?
A: Yes we can do Normal CO,FROM E,FROM F,FORM A etc.
Q4:What is your Delivery Time?
A:Normally Within 10-20days after getting your Prepayment or L/C.
Q5:Can you give Guarantee if I buy your belt?
A:Of course,we must give Guarantee for all of our Products,Please tell me your Details of Requirement.
We will be appreciated if you can provide the following specification:
If you are not sure for any of above,we can recommend for you.WELCOME INQUIRY US
Once we get above information we will quote exact price at soonest time.
