Pipe Cfw Mors Fr Conveyor Belt Natural Fabric Rubber Conveyor Belts

• Type: EP300
• Material: Rubber
• Inside Material: Fabric
• Model NO.: Pipe CFW MORS FR Conveyor Belt
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Flame Retardant
• Tensile Strength: Strong
• Cover Thickness Upper Lower: 0-4.5
• Cover Thickness Upper: 1.5-12
• Classification: Rubber Conveyor Belts
• Transport Package: PE Package
• Trademark: ZHENXING
• Origin: Shandong, China
• HS Code: 40101200
• Production Capacity: 200meters

Product Description

our company

Weifang Zhenxing Rubber Co. Ltd., founded in 1980,  covers an area of 80, 000m2, with both output value and assets of over 100million RMB.

Welcome Visit us~

 

Product Description

Pipe Conveyor Belt

 

Characteristics: 
No joint in belt carcass , long life span ,with flat surface and even tension, runs smoothly with low elongation
Plies: 2 to 12
Belt width: 300 to 1,600mm
Cover rubber thickness: 
Top: 1.5 to 12mm
Bottom: 1.5 to 10mm 
Tensile strength: 10 to 25MPa 

construction features and applications:
1. The belt has good flame resistant and anti-static properties. it can fully satisfy the requirements of MT-914 and is especially suitable for material conveying at inflammable conditions of underground coal mines.

2. The solid woven fabric uses high tensile strength and low elongation polyester long filament as warp fibre, for weft fibre, it uses high tensile and medium modulus nylon filament. The fabric is high in strength, low in elongation, light in carcass, free of separation of plies, shock resistant, anti-tear and good in troughability.

3. PVG type is covered with covers mainly composed of rubber, which further improves the troughability, resistance to wetness and slip, resistance to low temperature, elongation and wear resistance of the belt. Thus it can not only enhance the slope angle of conveying but also elongate life of belt.

  INTRODUCTION

Our airslide hose are usually used for bulk cement trailer discharging. It always woking on the bottom of the trailer. Through inflation by air compressor, it makes the bulk cement discharging from the trailer. Some people called Aeration hose. It is really very similar as Fire hose frame. But it's much more strength and impact toughness than fire hose. One side of our hose is the PU coating. It is for block off the air flow.

One side permeable,good abrasion resistance and long service life all synthetic.

One side PU coated,standard colour yellow PU-coating increases the abrasion resistance and supports at the same time the air permeability of the uncoated saide

Material:

Warp:100% polyester high tenacity fiber

Weft:100% polyester high tenacity filamen
Characteristics:

One side air permeable,other side PU-coated.Good abrasion resistance and long service life all aynthetic,lightweight and flexible,easy to coil ageing and ozone resistant-weather resistant minimum maintenance.

cold resistant to    -30°c

heat resistant to   +160°c

Aertion of bulk powders and granular in silos and silo wagons.

 

 

Product Parameters

 

 

 

 

Cover Rubber grade	8MPA,10MPA,12MPA,15MPA 18MPA,20MPA,24MPA,26MPA	DIN-X,Y,W RMA-1,RMA-2 N17,M24
Belt width (mm)	500,600.650,700,800,1000,1200 1400,1500,1800,2000,2200,2500	18",20",24",30",36",40",42" 48",60",72",78",86",94"
Tensile strength	EP315/3,EP400/3,EP500/3,EP600/3 EP400/4,EP500/4,EP600/4 EP500/5,EP1000/5,EP1250/5 EP600/6,EP1200/6	330PIW,  440PIW
Top+Bottom thickness	3+1.5,  4+2,  4+1.5,  4+3,  5+1.5,	3/16"+1/16",  1/4"+1/16"
Belt thickness	3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,12mm,15mm,20mm,25mm
Belt length	10m,20m,50m,100m,200m,250m,300m,500m
Belt edge type	moulded(sealed) edge or cut edge

Packaging & Shipping

 

Certifications