| Type: | EP250 |
|---|---|
| Material: | Rubber |
| Inside Material: | Fabric |
Classify by constructure:
1) Conventional type
2) Transverse reinforcement type: XE, XE+2, XE-SC+2 etc
Standard: GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc
Detailed Photos
In-house production of the sidewall
Especially useful for conveying of wet materials.
Side walls are reinforced with Synthetic fabric to maximize the belt life.
Corrugated sidewall belt can be designed into a set of complete transportatin systom according to application.
To reduce spillage from the edges of the conveyor belts especially in the case of wet material or extremely fine material moving at high speeds, Indus has developed special purpose Sidewall Belts facilitating the reduction of such spillage.
We recommend for minimum spillage, fast and bulk material handling purposes.l handling across the industries where material is being conveyed.
In order to protect sidewall conveyor belt properly, it must be stored in steel crate or container do sport until installation. The belt should be stored in a place that dry, away from direct sunlight thermal environment. Long-term temperature variation will cause adverse effect to belt.The ideal storage environment for temperature is between 10-21 degrees celsius. It will make the belt sclerosis or curing if it is long-term exposed to temperature of lower than 5 degree, which will cause the belt offtrack after installation and what's more, to impact the operation effect and belt service life.
AIl SINO-WALL Conveyor Belts leave the production line packed in such a way as to ensure safe transportation. It is important to always lift the steel crate from underneath by strapes or chains when handling it. Do not lift the crate at any other points as damage may result.
It is essential that when offloading and unpacking the belt that the utmost care be taken not to damage the belt. The belt should be unpacked as the following sketches, it is most important that under NO CIRCUMSTANCES should a steel cable or rope be used to lift the belt either out of a crate or onto the conveyor.
| type | H(mm) | Sw(mm) | Tw(mm) | P(mm) | EST Weight(kg) |
| S | 40 | 30 | 20 | 25 | 0.45 |
| 60 | 50 | 45 | 40 | 1.38 | |
| 80 | 50 | 45 | 40 | 1.70 | |
| 100 | 50 | 45 | 40 | 2.00 | |
| 120 | 50 | 45 | 40 | 2.65 | |
| MDSF | 120 | 75 | 65 | 63.5 | 3.20 |
| 160 | 75 | 65 | 63.5 | 4.20 | |
| 200 | 75 | 65 | 63.5 | 5.02 | |
| 240 | 75 | 65 | 63.5 | 7.50 | |
| 250 | 75 | 65 | 63.5 | 7.80 | |
| 280 | 75 | 65 | 63.5 | 8.70 | |
| 300 | 75 | 65 | 63.5 | 9.40 |
Q1. Are you a manufacturer?
Yes, we have mainly produced Rubber conveyor belts for over 40 years.
