Corrugated Sidewall Conveyor Belt Widely Used in Industry Rubber Conveyor Belt

• Customization: Available
• Type: EP250
• Material: Rubber
• Model NO.: corrugated sidewall conveyor belt
• Inside Material: Fabric
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Strong
• Base Belt: Multi-Ply(Ep/Nn/Cc) Fabric Type or Stee
• Sidewall Type: N, S, and Es Type
• Cleat Type: T, C, Tc, Ts and Tcs Type
• Sidewall Height: 60-300mm
• Cleat Height: 50-280mm
• Advantage: Less Space Requirement Low Maintenance Cost
• Conveys Height: 0-90
• Classification: Rubber Conveyor Belt
• Transport Package: Steel Shelf
• Specification: S 120 TC 110
• Trademark: ZHENXING
• Origin: Shandong, China
• HS Code: 40101200
• Production Capacity: 100meters/Day

Product Description

Product Parameters

Sidewall conveyor belts

Possible to convey at a steep angle with big capacity in a limited space
Property
-- Specially treated steel mesh inserted into both top cover and bottom cover, creating an excellent combination of longitudinal flexibility and transverse rigidity.
-- The entire steep angle conveyor belts are highly durable, low elongation, and long-lasting

Sidewall

-- Sidewall is hot vulcanized on the base belt

-- High-quality rubber to guarantee sidewall withstand high stress and repeated flexing

Cleats

-- Cleats are the main part to carry materials in a high capacity and steep angle


-- Available with TC or TCS type


-- Special compounds to extremely avoid deformation caused by impact.

Advantage:
•Able to convey at angles up to 90 degrees, ensures the maximum utilization space.
•Eliminates the transfer points, and reduces the risk of spillage.
•The sidewall can handle almost all materials.
•Keep materials from falling off the belt and keep loss at a minimumSplicing Method

Sidewall conveyor belts are composed of three parts: base belt, sidewall, and cleats.
 

Salient Features

Production of the sidewall Conveyor belt
Especially useful for conveying of wet materials.
Side walls are reinforced with Synthetic fabric to maximize the belt life.
Corrugated sidewall belt can be designed into a set of complete transportatin systom according to application.

To reduce spillage from the edges of the conveyor belts especially in the case of wet material or extremely fine material moving at high speeds, Indus has developed special purpose Sidewall Belts facilitating the reduction of such spillage.
We recommend for minimum spillage, fast and bulk material handling purposes.l handling across the industries where material is being conveyed.
 

Construction:

Base belt: Multi-ply(EP/NN/CC) fabric type or Steel Cord type

Sidewall: N, S, and ES type

Cleat: T, C, TC, TS and TCS type

Transverse reinforcement: According to clients' requirement

Application:

Steel Plant

Port

Sand, Grave

Foundries

Coal, Mining

Chemical, Fertilizer, etc.

 

 

Detailed Photos

 

Packaging & Shipping

Our Conveyor Belts leave the production line packed in such a way as to ensure safe transportation. It is important to always lift the steel crate from underneath by strapes or chains when handling it. Do not lift the crate at any other points as damage may result
It is essential that when offloading and unpacking the belt that the utmost care be taken not to damage the belt. The belt should be unpacked as the following sketches, it is most important that under NO CIRCUMSTANCES should a steel cable or rope be used to lift the belt either out of a crate or onto the conveyor.

 

In order to protect sidewall conveyor belt properly, it must be stored in steel crate or container do sport until installation.

The belt should be stored in a place that dry, away from direct sunlight thermal environment.

Long-term temperature variation will cause adverse effect to belt.The ideal storage environment for temperature is between 10-21 degrees celsius. It will make the belt sclerosis or curing if it is long-term exposed to temperature of lower than 5 degree, which will cause the belt offtrack after installation and what's more, to impact the operation effect and belt service life
 

 

Company Profile

Our Advantages

 

 

FAQ

Q1. Are you a manufacturer?

Yes, we have mainly produced Rubber conveyor belts for over 40 years.

Q2. What about the lead time?
1) 3--5 days for sample
2) 20--25 days for mass production. If urgent, we have the green channel.

Q3. How to pay?
T/T or L/C

Q4. How about the package?
Steep angle cleat conveyor belts are packed with an iron frame shelves.