| Customization: | Available |
|---|---|
| Type: | Cfw 200-500 |
| Material: | Cfw Fabric |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Exceptional resistance to abrasion, cutting and snagging. Flexural fatigue and impact resistance is much better than the normal fabric. High-carrying capacity and very low stretch.
Main Features of Impact Weft Wire Mesh Belts (IW belts)
The rugged steel mesh design provides superior rip and tear resistance performance. IW belt protect the belt from penetration of foreign materials, and also provide excellent heat resistance property. Various cover compounds can meet specific application. IW belt combined with heat resistant compound provide superior heat resistance up to 300ºC and minimize maintenance downtime.
Straight Warp( SW ) Conveyor Belt is suitable for conveying large drop height, large load and high speed in occasions. This belt is widely used in mining, electricity and ports industries.
This belt adapts 1-2plies SW canvass to replace multiplies EP or Nylon canvass, which can save 7-17% full thickness, to improve the sinuosity of the belt. I can make the belt run well with smaller pulleys, which make the length of the belt reach 400-500meters, to save the loss of the production.
With special weaving method, SW fabric layer has a good performance of high tension strength, and the working elongation of the belt can be reduced a lot. The special structure of straight warp can absorb impact higher than EP or Nylon material, which prolong the service life of the belt.
Application:
Single-ply Belting possesses a unique straight-warp carcass , unlike Conventional crimp weave fabrics. The carcass developed is a total departure from the traditional plies belt concept and constructions.it is designed to carry a large capacity of material and hasa Superior endurance performance in rugged environment.
| SW | STRENGTH | APPLICABLE RUBBER GRADE | APPLICATIONS |
|---|---|---|---|
| FABRIC X PLIES | (KG/CM, KN/M, N/MM) | ||
| SW400 x 1P | 400 ↑ | Abrasion Resistant | Steel |
| SW630 x 1P | 600 ↑ | Oil Resistant | Mining |
| SW800 x 1P | 800 ↑ | Flame Resistant | Coal |
| SW1000 x 1P | 1000 ↑ | Cold Resistant | Cement Plant |
| SW400 x 2P | 800 ↑ | Heat Resistant | Paper Industry |
| SW630 x 2P | 1200 ↑ | Impact Resistant | Port |
| SW800 x 2P | 1600 ↑ | Chemical Resistant | Power Plant |
| SW1000 x 2P | 2000 ↑ | Anti-Static Resistant | Impact Conveying |
| Heavy Industry |
To compare with the belts having the same grade of the tensile strength, the SW belt provides 10%~20% less weight, power saving to minimize the load of conveyor accessories, so as to reach the efficiency of saving power source and cost down.
Use one or two plies replace the multi-plies construction make total thickness 7%~17% thinner, increase the strength smoothly under the smaller. This can help the belt running smoothly under the smaller pully. Each roll length can be 400~500m to reduce the waste.
Use a special weave type of high-denier fiber to raise the tensile strength of the fabric, reduce the working elongation and replace the Mulit-plies construciton belts.
The special construction of the Straight Warp provides more impact absorption than EP or NN products, and increase the belt service life.
Technical indexes of CFW Fabric
|
Fabric Type |
Breaking strength |
Elongation at break |
weight |
thickness |
width |
Peel strength |
|
|
N/mm |
% |
g/m2 |
mm |
mm |
N/mm |
||
|
CFW200 |
warp |
>240 |
>15 |
650 |
0.85 |
800~2400 |
≥8 |
|
weft |
>80 |
≤45 |
|||||
|
CFW250 |
warp |
>330 |
>15 |
810 |
1.1 |
≥8 |
|
|
weft |
>90 |
≤45 |
|||||
|
CFW300 |
warp |
>350 |
>15 |
890 |
1.25 |
≥8 |
|
|
weft |
>100 |
≤45 |
|||||
|
CFW350 |
warp |
>400 |
>15 |
1050 |
1.30 |
≥8 |
|
|
weft |
>105 |
≤45 |
|||||
|
CFW400 |
warp |
>460 |
>15 |
1080 |
1.40 |
≥8 |
|
|
weft |
>110 |
≤45 |
|||||
|
CFW500 |
warp |
>570 |
>15 |
1350 |
1.55 |
≥8 |
|
|
weft |
>120 |
≤45 |
|||||
(1)Q: Are you a factory or trading company?
A: We are a factory with an export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost, this charge will be deducted from the payment for the order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For a small sample shipping costs, you can pay either by PayPal or by T/T. And by T/T or L/C at sight for a large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A, etc?
A: Yes, we can do them for you.
(6)Q: What is your factory's main product?
| No. | Rubber Conveyor Belt |
| 1 | Conveyor Belt for General Purpose |
| 1.1 | EP(polyester) Conveyor Belt: EP100,EP125,EP150,EP200,EP250,EP300,EP400,EP500,EP630 |
| 1.2 | NN(Nylon) Conveyor Belt : NN100,NN125,NN150,NN200,NN250,NN300,NN400,NN500,NN630 |
| 1.3 | Cotton Conveyor Belt: CC-56 CC70 |
| 1.4 | Steel Cord Conveyor Belt: ST630,ST800,ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST4000,ST4500,ST5000, ST5400 |
| 2 | Conveyor Belt for Special Purpose |
| 2.1 | Heat Resistant Conveyor Belt |
| 2.2 | High-Temperature Conveyor Belt |
| 2.3 | Fire Retardant Conveyor Belt |
| 2.4 | Cold Resistant Conveyor Belt |
| 2.5 | Oil Resistant Conveyor Belt |
| 2.6 | Chemical Resistant Conveyor Belt |
| 3 | Chevron (PaConveyor Belt |
| 4 | Bucket Elevator Conveyor Belt |
| 5 | Sidewall Conveyor Belt |
| 6 | Flat Transmission Belt |
){kind=link}